aurelien wolff
Airman 1st Class
- 284
- Sep 20, 2018
got those 4, tho I've seen interpretation of 425/17 with blue underside?
Recent Purchases (12 Viewers)
- Thread starter Heinz
- Start date
Lucky13
Forum Mascot
I woke up to have won this one....
Lucky13
Forum Mascot
Busy morning....
A4K
Brigadier General
Great scores guys 
My latest...
KP #KPM0525: Aermacchi MB-339 "International"
Blackbird Models #BMD72054: Spanish Civil War Pt.1
...and from Bill..! He asked if I wanted a set of Skyhawk markings, and I got THIS! (Thanks mate!)
My latest...
KP #KPM0525: Aermacchi MB-339 "International"
Blackbird Models #BMD72054: Spanish Civil War Pt.1
...and from Bill..! He asked if I wanted a set of Skyhawk markings, and I got THIS! (Thanks mate!)
Last edited:
fubar57
General
Good ones, Evan and well done Old Salt
A4K
Brigadier General
Re the 'Macchi... a little disappointing. The wings (except for the anorexic tip tanks) are correct (finally!), and undercarriage, etc are nice, but the fuselage has shape and dimension issues.
Judge for yourselves - attached pics show the KP kit (Dark Grey) and Supermodel kit (Light Grey) against plans by Richard J. Caruana (Scale Aviation Modeller International, Volume 5 Issue 7, July 1999)
I am waiting on the Litaki Aermacchi kits. If they are as good as everyone thinks they will be, great. If not, I willl have to mix the KP wings with the Supermodel fuselage (plus Kiwi Resin MB-339CB conversion set) to make a decent kiwi.
(Note: The Supermodel kit is also sold under the Italeri brand now)
Judge for yourselves - attached pics show the KP kit (Dark Grey) and Supermodel kit (Light Grey) against plans by Richard J. Caruana (Scale Aviation Modeller International, Volume 5 Issue 7, July 1999)
I am waiting on the Litaki Aermacchi kits. If they are as good as everyone thinks they will be, great. If not, I willl have to mix the KP wings with the Supermodel fuselage (plus Kiwi Resin MB-339CB conversion set) to make a decent kiwi.
(Note: The Supermodel kit is also sold under the Italeri brand now)
Last edited:
Berny5664
Senior Airman
It's true Evan, they pulled the model by the wings and retired the rudder
With a KP / Supermodel (Italeri) mix a good Mb339 can come out
Actually the drawings should be checked against a scale pic of the real kite taken from its side firstly. It happnens the drawings have the mistakes very often. As a result we are misled trying to correct a model parts. I'm not a jet fun but you inspired my , Evan.
I have to look if my mate in the local HS, has the KP kit. 
A4K
Brigadier General
Ahoj my friend!
Yep, you're right about checking drawings. In this case they appear 'right' to me. Even just looking at the kit fuselage it looked too short in the nose to me. New Zealand 'Macchis have a longer pointed nose too, for which an optional part is provided in the KP kit, but it still looks too short when compared to the real thing. The tail definitely needs to be taller too.
(Glad to have inspired you on jets! Some are beautiful )
Yep, you're right about checking drawings. In this case they appear 'right' to me. Even just looking at the kit fuselage it looked too short in the nose to me. New Zealand 'Macchis have a longer pointed nose too, for which an optional part is provided in the KP kit, but it still looks too short when compared to the real thing. The tail definitely needs to be taller too.
(Glad to have inspired you on jets! Some are beautiful
)
Berny5664
Senior Airman
This is an Italian couple of MB339 one CD and one A
Berny5664
Senior Airman
And this is a PAN tail
This last photo makes me doubt that the KP tail is correct for version A of 339..I'll check better. While for the CD it is clearly shorter
This last photo makes me doubt that the KP tail is correct for version A of 339..I'll check better. While for the CD it is clearly shorter
A4K
Brigadier General
According to the drawings I posted, all tails drawn (A, AD, K, C) measure 25.5 mm from rear tip of tail to fuselage in 1:72 scale.
Last edited:
Lucky13
Forum Mascot
Lucky13
Forum Mascot
Nice hauls. However please remember about applying of some clear ( can be gloss ) coat over the decla sheets before using them. It should protect the markings against cracking.
Lucky13
Forum Mascot
Right, will do my friend!
I've only used Techmod decals once before I think, if I remember correctly, they're extremely thin!
A4K
Brigadier General
Cheers for the heads up Wojtku, I have Techmod decals in my stash too.
To be honest these aren't too thin I would say. These are as these should be. A thin marking is better than a thick one. But the colours the Techmod used for printing weren't too flexible IMHO. What is more most of the Techmod decal sets offered are just printed a long time ago. Being storaged for a such long time they lost their already little flexibility for sure. As a result you have to be careful with them.