Shenyang JJ-5 North Vietnamese Air Force - n° 1505 of 910 th Training Regiment "Julius Fucik" (Hobby Boss 1/48)

[Soclakit86]

Hi everyone ;

as part of the build group for the 2020/2021 season of my club the Maquette Club Niortais (located in the west of France halfway between La Rochelle and Futuroscope) on the theme of the Vietnam War, I chose to ride a plane that you rarely see.

This is the two-seater version of the MiG-17 F Fresco C designed by China under the name of Shenyang JJ-5 or FT-5 for its export version.

For this build group, I will represent a machine from the 910 th Training Regiment "Julius Fucik" (a Czech Marxist writer born in 1903 and died in 1943) of the North Vietnam Air Force in 1967.

A little history:

The Shenyang JJ-5 was designed on the basis of the JJ-2 (Chinese construction of the MiG-15 UTI) and J-5 (Chinese construction of the MiG-17 F) following the split between the USSR and China at the start from the 60s. The armament of this version then only has one 23 mm gun

This two-seater version of the MiG-17 allowed China and its customers to have a more powerful training aircraft than the MiG-15 UTI.

The export users were:

_ Albania
_ North Korea
_ Pakistan
_ Tanzania
_ Zimbabwe
_ Sri Lanka
_ North Vietnam

The export version of the JJ-5 is called FT-5.

The Hobby Boss kit :

Published in 2010 this model consists of:

_ 127 pieces of light gray plastic spread over 5 clusters

_ 7 transparent pieces spread over 2 bunches

The decals sheet allows us 3 decoration options:

_ The white 510 of the PLAAF acrobatic team
_ The red 63549 of the 4th PLAAF Aviation Academy
_ The 55-1136 of the 1st FCU of the Pakistani Air Force based in Miānwāli

To improve this kit, I use the resin seats from Pavla intended for the MiG-17s.

Cordially

 

[Soclakit86]

Hi everyone;

the assembly began on September 12 at a club meeting

In order to ensure optimal alignment of the fuselage elements, I started by assembling the front and rear parts of each half fuselage before adding the wings and the fixed planes of the elevators.

The curvature flaps are also in place.

The nose gear well is placed on the air intake and the underside of the fuselage.

 

[Soclakit86]

Hi everyone;

Then comes the painting of the cockpit to which I only added in scratch the throttles (those in yellow) on the left side consoles.

Base color Gunze H-67, then washoklir Black and transplanted details in Black (Lifecolor LC-02), Red (Gunze H-23), Yellow (Gunze H-4) Silver (Prince August Air Metal 52) and Blue ( Gunze H-35)

The glass of the dials is simulated with colorless glossy nail polish.

The white band on the dashboards serving as a guide for setting the broom stick to neutral is made with White Oilbrusher (A.MIG 3501)

Assembly then painting of the Klimov VK-1F of this little Shenyang JJ-5.

This one is made with various tones of Vallejo Metal Color (Jet Exhaust, Pale Burnt Metal, Magnesium and Duraluminium) and a touch of aluminum (Prince August Air Metal)

The burnt / blued metal effects are done with Blue, Sepia and Cool Gray markers. The set also receives a Black washoklir.

 

[fubar57]

Coming together very nicely

 

[Soclakit86]

Closing the fuselage was not an easy task, it required the use of masking tape which was arranged to serve as tie rods to constrain the assemblies so as to try to have the best possible surface finish for the further assembly

The engine remains slightly visible through the speed brakes

A little glimpse of the cockpit

Tonight back from work, I was finally able to rework a little on the JJ-5 from Hobby Boss: D: D

On the menu, sanding and resuming the engraving, then installation of the arch between the two cockpits, rudders and pitot tubes.

The painting will start to approach quickly. Next step, the preparation of the trains and their hatches.

Cordially

 

[Soclakit86]

Good evening Furbar57;

Coming together very nicely

thank you for your comment, I hope to succeed in making a nice painting on this little JJ-5.

With this assembly, I will try my hand at making stencils for the codes.

cordially

 

[Wurger]

 

[Gnomey]

Good work so far!

 

[Crimea_River]

Lovely work. I had not heard of using nail polish for instruments. Interesting method of gluing the wings on before the fuselage halves are glued together - I would be very afraid of getting the wings angled incorrectly.

 

[Soclakit86]

Hello Crimea River;

Lovely work. I had not heard of using nail polish for instruments. Interesting method of gluing the wings on before the fuselage halves are glued together - I would be very afraid of getting the wings angled incorrectly.

i usually use nail polish for mounting photoetched dashboards.

For gluing the wings, I control the angle of it during assembly with a template cut out of cardboard.

Cordially.