Hello Stona, I also wondered the claim that 262 didn't have RLM backing, difficult to believe when in Jan 44 there were 23 pre-production machines waiting for their engines, would that had been any more helpful for Germany to have hundreds of 262s waiting for their engines?
Juha
A very good point. The RLM did back the Me 262 it was regarded as a top priority project. Messerschmitt themselves did not and sought clarification in early 1943 (I'd need to dig out some old files to give an exact date) which they received.
The Me 262 airframe was not new technology, in fact it is a fairly typical Messerschmitt airframe. The new technology lay in the engines and this is also where the problems were.
People need to make a more honest appraisal of the state of development of the engines fitted to "operational" Me 262s. In other countries they would have been years away from operational use. It was the technical difficulties involved in the development of turbojets that prevented their production in quantity until well into 1944. Once the Germans got going they produced plenty, 6,000 Jumo 004s, which is impressive, even if they didn't work very well or for very long.
On another popular myth I can find no evidence that Galland ever stated in an official capacity
during the war that the Me 262 should be reserved as a fighter. In the letter he wrote to Goering after he tested the Me 262 at Augsburg in May 1943 he wrote.
"Conclusion :a) Me 209 to be discontinued
b)Total fighter production to switch from the Fw 190 with BMW 801 to the Fw 190 with DB 603 and Jumo 213 respectively.
c) The construction and industrial capacities thus released to be concentrated on the Me 262, with immediate effect."
He was very keen on the Me 262 he wrote "The aircraft represents an enormous leap forward, it would give us an unimaginable lead over the enemy if he adheres to the piston engine". I can't find anywhere he said it should be reserved as a fighter and bomber interceptor until he started revising the history of the Luftwaffe post war.
Cheers
Steve