GrauGeist
Generalfeldmarschall zur Luftschiff Abteilung
A full-scale mockup of the Focke Wulf Project VII "Flitzer" jet fighter.
Aircraft Mock-Ups
- Thread starter Capt. Vick
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
GrauGeist
Generalfeldmarschall zur Luftschiff Abteilung
Here's an interesting concept, the Fiesler Fi333.
The concept was to have a transport that would be able to carry interchangeable pods (sound familiar, Thunderbird fans?) and was tried years later by other aircraft manufacturers.
The concept never got past the scale model proposal stage.
The concept was to have a transport that would be able to carry interchangeable pods (sound familiar, Thunderbird fans?) and was tried years later by other aircraft manufacturers.
The concept never got past the scale model proposal stage.
johnbr
2nd Lieutenant
GrauGeist
Generalfeldmarschall zur Luftschiff Abteilung
Scale model for wind tunnel testing the Ta400 design.
vikingBerserker
Lieutenant General
NICE!
Old Wizard
2nd Lieutenant
fubar57
General
Nice Dave, never heard of that one. Here's a short video to go with it.
View: https://youtu.be/I1kzsxIRCME
View: https://youtu.be/I1kzsxIRCME
GrauGeist
Generalfeldmarschall zur Luftschiff Abteilung
Cool vid, Geo...that Ta400 actually looked like they were onto something, but like most things Luftwaffe, took too long, was too little and much too late...
Speaking of which, here's a wind tunnel model of Lippische's P12 fighter concept.
Speaking of which, here's a wind tunnel model of Lippische's P12 fighter concept.
Old Wizard
2nd Lieutenant
johnbr
2nd Lieutenant
Xp-67 mockup
Old Wizard
2nd Lieutenant
- Thread starter
- #319
Great one John!
GrauGeist
Generalfeldmarschall zur Luftschiff Abteilung
Here's an interesting one...the Bell Model 16.
Originally designed as a twin-boom pusher with the designation XP-52, the model 16 was intended to have a contra-rotating propellor in a pusher configuration driven by a Continental XIV-1430-5 inverted V-12. It was to have two 20mm cannon in the nose and six .50 MG (3 in each boom leading edge).
With the delays in the V-12 engine, Bell's engineers turned to the P&W R-2800-23 engine and started a modified project based on the XP-52, designated the XP-59. So the XP-52 was cancelled on 3 November 1941 and the Model 16 project continued on as the XP-59. Two prototypes were ordered, but the project was cancelled before they were built. The XP-59 designation was eventually given to the P-59 jet project.
Shown is the Model 16 (XP-59) mockup at Bell's facility:
Originally designed as a twin-boom pusher with the designation XP-52, the model 16 was intended to have a contra-rotating propellor in a pusher configuration driven by a Continental XIV-1430-5 inverted V-12. It was to have two 20mm cannon in the nose and six .50 MG (3 in each boom leading edge).
With the delays in the V-12 engine, Bell's engineers turned to the P&W R-2800-23 engine and started a modified project based on the XP-52, designated the XP-59. So the XP-52 was cancelled on 3 November 1941 and the Model 16 project continued on as the XP-59. Two prototypes were ordered, but the project was cancelled before they were built. The XP-59 designation was eventually given to the P-59 jet project.
Shown is the Model 16 (XP-59) mockup at Bell's facility:
