put a sliver of masking tape down and lay the numbers above it and make sure the clear film is trimmed close on the sides and bottom. The biggest pain I found was letting the number dry sufficiently enough before moving on to the next one
put a sliver of masking tape down and lay the numbers above it and make sure the clear film is trimmed close on the sides and bottom. The biggest pain I found was letting the number dry sufficiently enough before moving on to the next one
Put 115's on the gear covers then checked the single picture of KD 658 and it seems the FAA sqn's only put last two numerals there so as the decals were dried and coated with future i painted over the first 1 on each cover.
Just noticed KD 658 did not have the forward ariel mast but i glued it on earlier !
Will sort it out on Sunday when i next will have time to work on it.