Nice one Geo. I built this kit a few years back, and there were no major problems - a couple of minor gaps needed filling though. There's plenty of scope for interior detailing, although not that much can bee seen.
Watch the nose weight - it needs lots, then lots more !
I stuffed the forward end of the radio compartment (out of view through the open door) with lead held in place with 'Plasticine', as well as the engine cowlings forward of the main gear, and anywhere else I could stuff it.This resulted in a heavy model, and I accidentally sheared one of the main gear axles, but I was able to drill and pin it with a length of paper clip.
There's a set of metal gear legs available, but it's about the price of the kit, or more !