**** DONE: 1/48 Me262A-1a KG(J)54 - Jet/Recon/Transport GB

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

the little fix is done starting on the canopy bits and rear cockpit area...
 

Attachments

  • 33_Gap done_5087.jpg
    32.7 KB · Views: 79
  • 34_Gap done_5089.jpg
    32.8 KB · Views: 80
Maybe a little make-up too....

That's the key, Andy...

Next step the rear cockpit section has been added and the front canopy section with armoured glass is done too...added a bit of paint to the inside surface of the canopy sections, looks a bit rough but once the external is done it will all blend nicely with minimal touchup
 

Attachments

  • 35_Cockpit rear section_5090.jpg
    40.7 KB · Views: 75
  • 36_Cockpit Rear section_5121.jpg
    41 KB · Views: 69
  • 37_Front Canopy sections_5114.jpg
    29.3 KB · Views: 68
  • 38_Front Canopy assembled_5117.jpg
    27.3 KB · Views: 73
Last edited:
Thanks Guys, further work around the cockpit....with the front and rear canopy sections now in place.
 

Attachments

  • 39_Front Canopy fitted_5125.jpg
    35 KB · Views: 75
  • 40_Rear section cross bar added_5132.jpg
    42.1 KB · Views: 80
  • 41_Rear section Painted_5135.jpg
    43.3 KB · Views: 77
  • 42_Rear Canopy on_5151.jpg
    40.1 KB · Views: 82
Thanks Guys, managed time to mask the canopy sections and decided to run some Silver over this one for the next stage which can have a Plan A or B depending on how the Green goes on to create the final finish, more later on that...

Didn't add the metal finish on the tail area as this was pre-painted separately with it's unique camo pattern and then added to the airframe.
 

Attachments

  • 43_NMF Coating_5168.jpg
    56.7 KB · Views: 70
  • 44_NMF Coating_5169.jpg
    48 KB · Views: 70
  • 45_NMF Coating_5171.jpg
    40.3 KB · Views: 79

Users who are viewing this thread