- Thread starter
-
- #41
Vic Balshaw
Major General
And again, forgot the wing roots on the fuselage...................................Ahhhhhhhhhhhhhhhhhhh 
**** DONE: GB-56 1:48 P-47D Razorback – Thunderbolts and Lightnings
- Thread starter Vic Balshaw
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Nice work so far Vic!
- Thread starter
-
- #43
Vic Balshaw
Major General
Thanks gents, kind and good words are always appreciated. Had a good day today, got lots done, engine mounted, wing on and some good spraying.
Went with an all over aluminium to start with checking for scratch, glue or finger marks. Used AK Xtreme Netal AK479.
Found a few minor blemishes, got these sorted and added the flaps and did a respray including the undercart bits.
Was a reasonably warm and dry day so was able to add a dark grey undercoat, just a quick swish with the airbrush using SMS Premium PL95 True Grey.
Went with an all over aluminium to start with checking for scratch, glue or finger marks. Used AK Xtreme Netal AK479.
![](data:image/svg+xml;charset=utf-8,<svg height="655px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="623px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
Found a few minor blemishes, got these sorted and added the flaps and did a respray including the undercart bits.
![](data:image/svg+xml;charset=utf-8,<svg height="616px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
Was a reasonably warm and dry day so was able to add a dark grey undercoat, just a quick swish with the airbrush using SMS Premium PL95 True Grey.
![](data:image/svg+xml;charset=utf-8,<svg height="658px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="668px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
le_steph40
Chief Master Sergeant
Excellent
Jock Tamson
Staff Sergeant
Looking good Vic
Crimea_River
Marshal
You have a scheme hatching Vic? Panting everything aluminum and then covering it all with grey?
- Thread starter
-
- #48
Vic Balshaw
Major General
Just experimenting!! Grey is a tad or two darker than I wanted, will have another shot today.
Last edited:
fubar57
General
Nice paint. I wonder if that paint is in Canada. I'm still struggling to get a decent source for Mr. Hobby acrylic or more importantly, shipping
- Thread starter
-
- #50
Vic Balshaw
Major General
Looking a the distribution, not in Canada but over the border in that other country!
The Gundam Place Store, Cumming, GA 30040.
Online Gundam Store, Gunpla Models & Tools
USA Gundam Store, Daytona Beach, FL.
Fusion Scale Hobbies, Ocean Springs, MS 39564.
The Gundam Place Store, Cumming, GA 30040.
Online Gundam Store, Gunpla Models & Tools
USA Gundam Store, Daytona Beach, FL.
USAGS - Gundam Models, Gunpla Models, Star Wars Nendoroids
Gunpla Gundam Models,Gundam Model, and Hobby tools, GSI Cros, Mr Hobby, and Star wars Nendoroids and GSC Good Smile. Your Destination for all your Gunpla Needs. We are the prime Gundam , Gunpla Destination for all Gundam Model kits Kotobukiya
Fusion Scale Hobbies, Ocean Springs, MS 39564.
Fusion Scale Hobbies
Shop all top hobby model brands here at Fusion Scale Hobbies.
- Thread starter
-
- #51
Vic Balshaw
Major General
Thanks guys. Little more progress today, got the final underside grey on. Used a combination of Vallejo 71.121 light gull grey and 71 276 US light grey.
Hope to work on the top coat tomorrow, the boss permitting.
![](data:image/svg+xml;charset=utf-8,<svg height="666px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
Hope to work on the top coat tomorrow, the boss permitting.
Looks good so far Vic!
- Thread starter
-
- #53
Vic Balshaw
Major General
Thanks guys. Bit of a slow day, to much other stuff to sort out, lots of shrub trimming in the complex. My fault really as I planted them so I have to trim them and there is only a couple of true gardeners in our 12 unit complex. Anyway, to the Razorback. Got the top coat on and worked the paint chopping. Also did some mucking and panel line highlighting on the underside but more on that another time.
Today's paint effort using SMS 167 Olive Drab.
Today's paint effort using SMS 167 Olive Drab.
![](data:image/svg+xml;charset=utf-8,<svg height="640px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
Jock Tamson
Staff Sergeant
Nicely done Vic, it's easy to get carried away with paint chipping. Yours is looking convincing.
- Thread starter
-
- #55
Vic Balshaw
Major General
Thanks Greg. This was my first attempt at chipping and personally I feel it is a little heavy so I need to refine my technique a bit.
Totalize
Tech Sergeant
Wow Vic. Nice work on the engine and cockpit. You're just motoring along on this build. Good stuff.
Crimea_River
Marshal
I see what you were doing now Vic.Same technique as the fella on the Swordfish?
fubar57
General
Neato
Airframes
Benevolens Magister
Nice work Vic, it's certainly looking a bit worn.
- Thread starter
-
- #60
Vic Balshaw
Major General
Many thanks for popping in for a look and the kind words. Managed to get a few bits an bobs sorted on what has been a fractured day.
Have finished the main airframe painting though a couple of bits need a touch-up. The prop is finished save for some dirt and have got the legs ready, they just need the doors fitted and scuffed up a bit.
Have finished the main airframe painting though a couple of bits need a touch-up. The prop is finished save for some dirt and have got the legs ready, they just need the doors fitted and scuffed up a bit.
![](data:image/svg+xml;charset=utf-8,<svg height="577px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="569px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="630px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="718px" width="700px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="1px" width="1px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)
![](data:image/svg+xml;charset=utf-8,<svg height="16px" width="16px" xmlns="http://www.w3.org/2000/svg" version="1.1"/>)