SaparotRob
Unter Gemeine Geschwader Murmeltier XIII
Great stuff!
**** DONE: GB-63 1/48 F-82 Twin Mustang 449th Sq Alaska – One Trick Pony
- Thread starter T Bolt
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
- Thread starter
- #182
T Bolt
Colonel
Thanks guys
Vic Balshaw
Major General
That one is a double "WOW!" 
- Thread starter
- #184
T Bolt
Colonel
Thanks Vic
The fuel tanks and rocket racks ready to go. Every picture of the Alaskan P-82s I have seen show them usually with the rocket racks but never with rockets, so I will not be mounting the rockets.
The fuel tanks and rocket racks ready to go. Every picture of the Alaskan P-82s I have seen show them usually with the rocket racks but never with rockets, so I will not be mounting the rockets.
Donivanp
Lieutenant Colonel
Coming right along. Hard to believe what it started with to how it's turning out.
Really is looking fantastic Glenn
Crimea_River
Marshal
Very slick Glenn.
Absolutely brilliant result Glenn well done man...
Lovely work so far Glenn!
- Thread starter
- #191
T Bolt
Colonel
I tried something I wasn't sure would work. I cut a stencil for the fuselage numbers out of tape with an xacto knife and it worked out pretty well except I forgot to cut the dash out. It won't be too hard to fix.
Also got a good start on the decals.
Also got a good start on the decals.
fubar57
General
Those turned out well
Donivanp
Lieutenant Colonel
Super Neato
Vic Balshaw
Major General
Well done Glenn, very neat.
le_steph40
Chief Master Sergeant
With above 
- Thread starter
- #198
T Bolt
Colonel
The props have been assembled but still need to be hit with dull coat. I hate it when kits have separate blades and no positive way to lock them in the proper place. I spent well over an hour getting these right.
I painted on the missing dashes, sprayed some darker silver around the exhausts, coated all the red with Future and managed to straighten out the under-canopy antenna in the left cockpit by prying open the bottom joint and slipping in a thin steel rod to manipulate it back into position.
Also finished up the decals except for the tail numbers. I had 2 sets to make up the 6415, but they all desegrated even after being coated with Micro Liquid Decal Film. I will have to come up with something else.
I painted on the missing dashes, sprayed some darker silver around the exhausts, coated all the red with Future and managed to straighten out the under-canopy antenna in the left cockpit by prying open the bottom joint and slipping in a thin steel rod to manipulate it back into position.
Also finished up the decals except for the tail numbers. I had 2 sets to make up the 6415, but they all desegrated even after being coated with Micro Liquid Decal Film. I will have to come up with something else.
fubar57
General
Shame about the decals Glenn but looks great.
