**** DONE: GB-63 1/48 Hawker Typhoon 1B - Stormy Weather
- Thread starter Crimea_River
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Wow Andy well done getting those done without mishap!
Good work so far Andy!
Doin' good man...
- Thread starter
- #65
Crimea_River
Marshal
Thanks guys. Slow progress but progress there is. The "gondolas" for the bombs are meant for a Tempest, whose wings have a much thinner chord than those of a Typhoon so the curvature didn't suit my model very well. A combination of digging out more material in the middle and filling more on the ends has resulted in a good basis for fitting these on. Now it's on to several rounds of adding filler and sanding to shape. Some ways to go yet before they look acceptable:
When I'm done all this, I'll add the various deflector plates around the ejector chutes.
The inside of the chin scoop is not very well represented as the insert at the top only goes part way down the sides of the housing, leaving a huge step that needs to be ground out and smoothed as it's quite visible. The top seam also needed some work and still does, as you can see:
Likewise, there were some very slight seam indications on the fuselage inserts when I shot a trial coat of primer on so I dabbed a bit more surface primer on that will be sanded back to level.
I hope to make some good inroads on this model the rest of this week. Once all this smoothing work is done, things should go a lot faster. Thanks for looking in guys.
When I'm done all this, I'll add the various deflector plates around the ejector chutes.
The inside of the chin scoop is not very well represented as the insert at the top only goes part way down the sides of the housing, leaving a huge step that needs to be ground out and smoothed as it's quite visible. The top seam also needed some work and still does, as you can see:
Likewise, there were some very slight seam indications on the fuselage inserts when I shot a trial coat of primer on so I dabbed a bit more surface primer on that will be sanded back to level.
I hope to make some good inroads on this model the rest of this week. Once all this smoothing work is done, things should go a lot faster. Thanks for looking in guys.
Vic Balshaw
Major General
Your slaving away Andy but you'll get there and nice going.
Airframes
Benevolens Magister
Coming along nicely Andy, and methinks another great model is on the way.
Ah....doing that fun stuff Andy....
Great attention to detail as always Andy 
Totalize
Tech Sergeant
This is not a stretch for your skills Andy. I am sure you will have these details worked our nicely.
- Thread starter
- #72
Crimea_River
Marshal
Thanks all. Work around the bomb carriers continued last night with more smoothing and the addition of the deflector plates at the chute openings and the attachment lugs for the early carrier position. A test shot of Medium Sea Grey shows just a bit more touching up needed here and there, though I'll keep in mind the offending bits will be within the black zone of the AEAF stripe.
Vic Balshaw
Major General
They cleaned up well Andy.
SaparotRob
Unter Gemeine Geschwader Murmeltier XIII
That they did. Good job!
- Thread starter
- #76
Crimea_River
Marshal
Thanks all. Back on track with the radiator painted and fitted.
Yes, those file marks above the intake will be addressed but, for now, I wanted to get on with adding the supports that held the dust filter in place as seen here (though bent):
I cut some strips form styrene card stock and played with the lengths until they fit. Fiddly yes but effective.
With that done, I slid in the cockpit and secured it with large dabs of CA, then chucked the wing on. Right now, I've just glued the back seam and along the radiator housing and will tackle the wing roots tomorrow when the glue has dried.
Yes, those file marks above the intake will be addressed but, for now, I wanted to get on with adding the supports that held the dust filter in place as seen here (though bent):
I cut some strips form styrene card stock and played with the lengths until they fit. Fiddly yes but effective.
With that done, I slid in the cockpit and secured it with large dabs of CA, then chucked the wing on. Right now, I've just glued the back seam and along the radiator housing and will tackle the wing roots tomorrow when the glue has dried.
fubar57
General
Well done
Very nice
Vic Balshaw
Major General
Nice work Andy.
