Spent the night installing the gunsight/armor plate . Glued the rear window on and upper window hatch . Next to mask the clear parts and opening. Then i can spray the window frames .
Spent a couple of days got the canopy masked off . Used some Omask to mask off the open area off. Had to repaint part part of the prop hub the went around the blades that was olive drad instead of red . Got the rest of the various parts cleaned up and ready for paint. Now to spray the the window frames with interior green. Once done ill mask the wheel wells off and spray the neutral gray .
Started spraying the bottom side with Tamiya Neutral Gray tonight . Going to spray the demarcation the same way i did befor or try something new with blue tack .
Started masking the underside today. I used the Tamiya paint guide. I cut them out in sectionsd and traced then on Tamiya tape with a pen. Used blade to cut them out. Now to mask off areas to prevent over spray .
DC9CE07D-2D84-4CB7-A8C6-7DE3B52A3898 by b007scott, on Flickr
Started masking the underside today. I used the Tamiya paint guide. I cut them out in sectionsd and traced then on Tamiya tape with a pen. Used blade to cut them out. Now to mask off areas to prevent over spray .