**** FINISHED: GB-49 1/48 B.P Defiant NF 1 - WW2 Night Fighter

Jock Tamson · Mar 1, 2021

User name: Jock Tamson
Name: Greg
Level: Intermediate
Scale: 1/48
Kit: Airfix Boulton Paul Defiant NF 1
Extras used: Resinseat with seatbelts; PMask vinyl masks; Yahu Instrument panel

Here is my RAF 264 Squadron BP Defiant NF 1 flown by Squadron Leader Philip J Saunders based at Debden and Biggin Hill Dec 1940/February 1941. Given its the CO's aircraft i have kept wear and weathering to a minimum. I am not sure the photos will show it but there are some different shadings and gentle weathering on areas that would see some disruption of the overall black finish. The whole thing is brush painted using Revell and Humbrol acrylics. TFL Cheers Greg.

Wurger · Mar 1, 2021

Well done!

Jeff Hunt · Mar 1, 2021

Looks all set for a little night time hunting!

Jeff

fubar57 · Mar 1, 2021

Turned out great Greg. I need one to go with my camo version

Snautzer01 · Mar 1, 2021

Very nice.

rochie · Mar 1, 2021

That is really great, well done

Crimea_River · Mar 1, 2021

Very sharp Greg.

Jock Tamson · Mar 1, 2021

Wurger said:
Well done!

Jeff Hunt said:
Looks all set for a little night time hunting!

Jeff

fubar57 said:
Turned out great Greg. I need one to go with my camo version

Snautzer01 said:
Very nice.

rochie said:
That is really great, well done

Crimea_River said:
Very sharp Greg.

Many thanks to you all, I am glad you like her. Sorry the photos turned out a bit dark.

Cheers Greg

Crimea_River · Mar 1, 2021

Black subject on a light background is tough. Usually it's best to compensate by over exposing.

N4521U · Mar 1, 2021

Your build looks great.

A method I use for photos if I may;
1. I use a single sheet of color paper, in this case light blue. Wrong for this shot, I may use white or charcoal paper, soething to contrast with the planes colors. Just a craft paper from an art store. Been using it for a long time.
2. I use a back room with lots of indirect light from the midday sun.
3. Rotate the model for your shots once you get the right light direction.
4. The test result for one of the required angles. Just tooooo much blue!
Simple as falling off a log.

Jock Tamson · Mar 2, 2021

N4521U said:
Your build looks great.

A method I use for photos if I may;
1. I use a single sheet of color paper, in this case light blue. Wrong for this shot, I may use white or charcoal paper, soething to contrast with the planes colors. Just a craft paper from an art store. Been using it for a long time.
2. I use a back room with lots of indirect light from the midday sun.
3. Rotate the model for your shots once you get the right light direction.
4. The test result for one of the required angles. Just tooooo much blue!
Simple as falling off a log.
View attachment 614416 View attachment 614417

Thanks for that Bill, you have made that look very straightforward

I am taking my photos using desk lamps in a room that doesn't have much indirect daylight. I am going to have to practice a lot more to get as good photos as you and the other guys get.

Cheers Greg

N4521U · Mar 2, 2021

If youre using your phone, try Zooming for your shot instead of moving in close!!!!

Wayne Little · Mar 2, 2021

great job there Greg.

Gnomey · Mar 6, 2021

Nice work!

le_steph40 · Mar 7, 2021

Excellent work Greg

Jock Tamson · Mar 7, 2021

Wayne Little said:
great job there Greg.

Gnomey said:
Nice work!

le_steph40 said:
Excellent work Greg

Cheers folks, many thanks for the kind comments

fastmongrel · Mar 7, 2021

N4521U said:
Your build looks great.

A method I use for photos if I may;
1. I use a single sheet of color paper, in this case light blue. Wrong for this shot, I may use white or charcoal paper, soething to contrast with the planes colors. Just a craft paper from an art store. Been using it for a long time.
2. I use a back room with lots of indirect light from the midday sun.
3. Rotate the model for your shots once you get the right light direction.
4. The test result for one of the required angles. Just tooooo much blue!
Simple as falling off a log.
View attachment 614416 View attachment 614417

Great tips just need the art store to reopen and I will get some different colours of papers.

Crimea_River · Mar 7, 2021

Make sure that the paper is securely weighed down or clipped to the surface! I use that technique but almost lost my model when the paper slipped over the edge of the table.

SaparotRob · Mar 8, 2021

Great job. I can see why the red circle of the roundels were painted white in the PTO.

N4521U · Mar 9, 2021

SaparotRob said:
Great job. I can see why the red circle of the roundels were painted white in the PTO.

That's why the red dot was removed from the Star in the US insignia!

**** FINISHED: GB-49 1/48 B.P Defiant NF 1 - WW2 Night Fighter

Staff Sergeant

Siggy Master

1st Lieutenant

General

Honourably banned

Moderator

Marshal

Staff Sergeant

Marshal

Colonel

Staff Sergeant

Colonel

Moderator

Globetrotting Surgeon General

Chief Master Sergeant

Staff Sergeant

1st Sergeant

Marshal

Unter Gemeine Geschwader Murmeltier XIII

Colonel

Users who are viewing this thread

Similar threads