Fli...wha...cri...oomph....stutter....stagger....er....Good Grief!!!
Is there going to be ANY of the original kit left Wojtek?!! Fantastic work!
BTW, if you would like some unused, thin, aluminium printing plates, approx. 35 x 25 cm, to use for making templates, let me know. I have a small stash hidden away somwhere!
Terry I'll remember your offer.Thank you very much. That's very kind of you.
Here the next shots.The inner surfaces of the lower half of the wing have to be make smooth as well if we want to put there a few elements that can be seen by the wheel bays.For that purpose I used an another scalpel razor and sand paper.
"The struggle" against the wheel bays continuation.....
As I told you these doors fitted to the bays of the wing model but these don't fit to drawings.I tried a couple of times to find their correct position but without any success.However I found that the front edge of bays could be a reference point for making correction.Then I compared the area with a door of a correct shape and all became clear.I started making corrections.