that's a bit of alright...!
GB-50 1/48 P-47D-27-RE - Zombie Build
- Thread starter Donivanp
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
- Thread starter
- #22
Donivanp
Captain
Oh, ok
T Bolt
Colonel
Looking good Don
- Thread starter
- #24
Donivanp
Captain
Not happy with the paint, into a brake fluid bath she went.
Crimea_River
Marshal
Well okay then....
- Thread starter
- #26
Donivanp
Captain
It all stims from my HS Evolution air brush. I've had problems with it since I got it. Too much pressure and spitting paint. I was talking to Dale about it today and I called my supplier and spoke to them. Seems I had never taken the shipping cap of!!
The cylender is the head with shipping cap on. I didn't know it was the shipping cap. took a couple sets of plyers to separate.
Causes quite a mess.
With the correct head on. Now we can try this $300 airbrush (well $308 but let's not quibble)
The cylender is the head with shipping cap on. I didn't know it was the shipping cap. took a couple sets of plyers to separate.
Causes quite a mess.
With the correct head on. Now we can try this $300 airbrush (well $308 but let's not quibble)
Crimea_River
Marshal
RTFM.....
- Thread starter
- #28
Donivanp
Captain
Yeah I know right! But it didn't come with one
Mine did a little spit yesterday too....stripped it twice, cleaned it out, but ran out of time to try again, maybe tomorrow, pain when things don't quite go to plan...
- Thread starter
- #30
Donivanp
Captain
Okay, so I figure most all of you here know how to do this and most would prefer not to but here it is for those who may not know.
If you have a really screwed up paint or say you bought a kit that came chrome plated and you want to strip it. go to you local store and find the cheapest brake fluid you can find. Get a tube and place the kit or parts in and pour on the brake fluid. Let set a few hours and use a tooth brush to scrub it off. I left this in a few days and the wings came off so don't leave it too long normally 1 day or less (four hours should do most)
take the kit or parts and give a good soaking.
properly dispose of the fluid!
If you have a really screwed up paint or say you bought a kit that came chrome plated and you want to strip it. go to you local store and find the cheapest brake fluid you can find. Get a tube and place the kit or parts in and pour on the brake fluid. Let set a few hours and use a tooth brush to scrub it off. I left this in a few days and the wings came off so don't leave it too long normally 1 day or less (four hours should do most)
take the kit or parts and give a good soaking.
properly dispose of the fluid!
Nicely done so far!
Most interesting....
fubar57
General
Mine never came with a shipping cap
- Thread starter
- #34
Donivanp
Captain
I did find a manual and it doesn't discuss the shipping cap anywhere. So anyway it works fine now.
So pulled it out of its dishwasher bath.
Hmmm looks like a plane wreck
You could do a diorama now.....
- Thread starter
- #36
Donivanp
Captain
Yeah sure, .......You could do a diorama now.....
N4521U
Colonel
God almighty!
- Thread starter
- #38
Donivanp
Captain
And yes he is Bill!
T Bolt
Colonel
I'll have to remember that trick
- Thread starter
- #40
Donivanp
Captain
I let it soak too long and it disassembled a bit to much
Users who are viewing this thread
Similar threads
