While waiting on the book to continue detailing, decided to sand the canopy scratching, and bugger me if it's not just scratched, but cracked right through on the first four port side panes. Am nowconsidering options... go the civilian 'Kamikaze' version (that canopy is mostly ok), or try to scratchbuild an open canopy from clear plastc sheet and replace the affected sections altogether.
Nice idea Dave, but as you can see gluing won't help, and as it's right through, can't polish it out either.
My son very kindly offered me his Arii C5M2 canopy (bless his heart), but I don't want to take from his kit, and unfortunately it has it's own unfixable blemishes anyway. (None of the 4 Arii canopies we have are scratch or blemish free...)
He gave me a great idea to cut out the bad bits from mine and replace them with good parts from one of the spare flat ones, but unfortunately it's right on the raised section that the crack is... so looks like scratchbuilding open canopies it will be!
BTW, cheers for the heads up Dave on the Headlight polish. Using Tamiya Compound at moment ('Fine' now, 'Finish' later), but will keep that in mind.
Never vacformed before my friend, but I do have a vacform Judy canopy, middle section of which should do for the open cockpit canopy. The fixed middle section I will try to improvise from clear plastic sheet or formed packaging, with plastic strip or Tamiya tape frames... we'll see!
Not sure if it is worth to do. But I have thought about replacing of the damaged panels as well. From my experience the easier way is to use the damaged conopy and press it into a box of plasticine in order to get the mould. Then ( after removing the glass from the plasticine mould ) fill the mould with an epoxy to get the former ( a female mould ). Having this you may sand down the cockpit frames and make the former smooth. And then take a sheet (piece) of clear plastic and warm up it to get it very soft. The next step is to wrap the clear sheet on the former.
The way I used for making the pilot's chair in my thread. Se the link below. The difference is that I made the female mould ( the former ) of the wood ( balsa) and used the white plastic instead of the clear one.
Some of you might have encountered a problem with incorrect seats for cockpis of your models. Of course there are different rasin part offered and it is no problem to find them via the net for instance. But the cost of a such sets is quite huge often. That's why I would like to show you a way...