F-104nut
Staff Sergeant
User Name: F-104Nut
Name: Brian
Category: intermediate
Kit: Airfix
Scale:1/48
Accessories: Xtra decals . Quinta Sutdio Eat seat , dead desihn mask .Starting on my 2nd Airfix Buccaneer . Really enjoyed the first build. ir-scoop also on the kit was a Little short shot so I used a UMM saw to cut the bad section out . Drilled various size holes in the plastic rod and glued on then blended with various Tamiya sanding sponges . Going to build this one with the bomb bay opened with 4 x 1000lb bombs . Hole drilled out for the crew ladders . I will also use the slipper fuel tanks . Cockpit parts now ready for paint. Since i mask the cockpit off while paint i find it easier to glue the rear instrument panel to the left side of the cockpit wall instead of gluing it to the seat like instructions call for . One of the nose struts the axel pin was short shot so I drilled a hole through both sides of the struts and will use a piece of wire for axel . Center intake wheel well subassemblies ready for painting . Test fit the fuselage together what a beast of an airframe .
IMG_5033 by b007scott, on Flickr
IMG_4928 by b007scott, on Flickr
IMG_5294 by b007scott, on Flickr
IMG_5120 by b007scott, on Flickr
IMG_5121 by b007scott, on Flickr
IMG_5034 by b007scott, on Flickr
IMG_5037 by b007scott, on Flickr
IMG_5036 by b007scott, on Flickr
IMG_5038 by b007scott, on Flickr
IMG_5059 by b007scott, on Flickr
IMG_5061 by b007scott, on Flickr
IMG_5063 by b007scott, on Flickr
IMG_5082 by b007scott, on Flickr
IMG_5080 by b007scott, on Flickr
IMG_5081 by b007scott, on Flickr
IMG_5084 by b007scott, on Flickr
IMG_5083 by b007scott, on Flickr
IMG_5097 by b007scott, on Flickr
IMG_5096 by b007scott, on Flickr
IMG_5095 by b007scott, on Flickr
Brian
Name: Brian
Category: intermediate
Kit: Airfix
Scale:1/48
Accessories: Xtra decals . Quinta Sutdio Eat seat , dead desihn mask .Starting on my 2nd Airfix Buccaneer . Really enjoyed the first build. ir-scoop also on the kit was a Little short shot so I used a UMM saw to cut the bad section out . Drilled various size holes in the plastic rod and glued on then blended with various Tamiya sanding sponges . Going to build this one with the bomb bay opened with 4 x 1000lb bombs . Hole drilled out for the crew ladders . I will also use the slipper fuel tanks . Cockpit parts now ready for paint. Since i mask the cockpit off while paint i find it easier to glue the rear instrument panel to the left side of the cockpit wall instead of gluing it to the seat like instructions call for . One of the nose struts the axel pin was short shot so I drilled a hole through both sides of the struts and will use a piece of wire for axel . Center intake wheel well subassemblies ready for painting . Test fit the fuselage together what a beast of an airframe .
Brian
Last edited: