B36 Build

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

DBII

Senior Master Sergeant
3,108
1,500
Oct 16, 2007
Conroe, Texas
My father is 84 and has been on a slow decline for the past couple if years. He has left the house once expect for doctor visits the past 3 years. His three favorite planes or B25, AT6 and B36. So I finally picked this up and need to get busy.
 

Attachments

  • IMG_20211006_192233.jpg
    IMG_20211006_192233.jpg
    103.4 KB · Views: 62
I am almost your father's age and know how tough it can be. Your picture of the B 36 kit is a bit fuzzy and I cannot see what scale it is. About 15 years ago I bought a 1/72 scale kit of the same aircraft from a stall at an air show and gave it to my grandson. He made a good job of building it but unfortunately the decals (transfers to us oldies) were badly cracked from age and were virtually unuseable. It was a massive model. Good luck in building it for your dad. He will be delighted. Best wishes to him.
 
I am almost your father's age and know how tough it can be. Your picture of the B 36 kit is a bit fuzzy and I cannot see what scale it is. About 15 years ago I bought a 1/72 scale kit of the same aircraft from a stall at an air show and gave it to my grandson. He made a good job of building it but unfortunately the decals (transfers to us oldies) were badly cracked from age and were virtually unuseable. It was a massive model. Good luck in building it for your dad. He will be delighted. Best wishes to him.
It is the new product run if the Old Revelle box scale B36. It is 1/184 scale. The wing span is 19 inches if I remember right. Released by Atlantis. Found out the B29 release has decals for FiFi. Hobby lobby just got it and this week it is 40% off. Might have to get one and the early model B25.
 
I was hoping my father would build it. He passed. He completed a level 1 kit of a B29 yearly this year. He grew up in north Texas. Sunday he was telling me about the sound they made. They flew low in groups of six. What a sight that was. Monster of a plane.
 
My wife was injured at work and had a total shoulder replacement. Also broke the hand on the other side. Lots of stress. Just started 2 months of therapy. This is my therapy. So I washed off the plastic and hope to start the build soon.
 

Attachments

  • IMG_20211021_170515.jpg
    IMG_20211021_170515.jpg
    105.6 KB · Views: 43
  • IMG_20211021_170453.jpg
    IMG_20211021_170453.jpg
    104.2 KB · Views: 37
  • IMG_20211021_170327.jpg
    IMG_20211021_170327.jpg
    122.5 KB · Views: 32
  • IMG_20211021_170346.jpg
    IMG_20211021_170346.jpg
    106.2 KB · Views: 43
  • IMG_20211021_170403.jpg
    IMG_20211021_170403.jpg
    131.9 KB · Views: 40
  • IMG_20211021_170417.jpg
    IMG_20211021_170417.jpg
    108.7 KB · Views: 38
Here the trees.
 

Attachments

  • IMG_20211021_170121.jpg
    IMG_20211021_170121.jpg
    122.5 KB · Views: 39
  • IMG_20211021_170134.jpg
    IMG_20211021_170134.jpg
    102.4 KB · Views: 41
  • IMG_20211021_170204.jpg
    IMG_20211021_170204.jpg
    124.6 KB · Views: 35
  • IMG_20211021_170220.jpg
    IMG_20211021_170220.jpg
    117.6 KB · Views: 33
  • IMG_20211021_170237.jpg
    IMG_20211021_170237.jpg
    101.8 KB · Views: 38
  • IMG_20211021_170220.jpg
    IMG_20211021_170220.jpg
    117.6 KB · Views: 37
This is a fast build but I am taking it slow. To many thing to do. Could easily knock this out over the weekend. These older kits had raised images so the kids could place the markings in the correct place. I took the sanding stick to it. There is a lot of trimming to do. The tree is thick on the tail so I used the cutter on it. Trimmed up the tail but dry fitting does not good. Looks like there will be a nasty seem to deal with. No problems. The modelers on this site taught me how to deal with that.
 

Attachments

  • IMG_20211023_153624.jpg
    IMG_20211023_153624.jpg
    105.5 KB · Views: 24
  • IMG_20211023_153727.jpg
    IMG_20211023_153727.jpg
    89.4 KB · Views: 27
There is nothing on the inside of this bird. I though about painting the inside interior green but since there is nothing there, I may just paint it dark gray to hide the emptiness. Before sanding and after.
 

Attachments

  • IMG_20211023_154043.jpg
    IMG_20211023_154043.jpg
    113.5 KB · Views: 27
  • IMG_20211023_165559.jpg
    IMG_20211023_165559.jpg
    134.4 KB · Views: 21
  • IMG_20211023_154102.jpg
    IMG_20211023_154102.jpg
    133.8 KB · Views: 20
  • IMG_20211023_165708.jpg
    IMG_20211023_165708.jpg
    114.7 KB · Views: 24
  • IMG_20211023_154114.jpg
    IMG_20211023_154114.jpg
    112 KB · Views: 27
  • IMG_20211023_165701.jpg
    IMG_20211023_165701.jpg
    146.8 KB · Views: 25
  • IMG_20211023_154135.jpg
    IMG_20211023_154135.jpg
    109.5 KB · Views: 28
Here is the front office. I may try putting in a floor, a couple of seats and instrument panel. Paint or no paint?
 

Attachments

  • IMG_20211023_154449.jpg
    IMG_20211023_154449.jpg
    93.8 KB · Views: 22
  • IMG_20211023_154508.jpg
    IMG_20211023_154508.jpg
    102.2 KB · Views: 24
  • IMG_20211023_154529.jpg
    IMG_20211023_154529.jpg
    95.9 KB · Views: 27
  • IMG_20211023_154529.jpg
    IMG_20211023_154529.jpg
    95.9 KB · Views: 25
  • IMG_20211023_165852.jpg
    IMG_20211023_165852.jpg
    133.1 KB · Views: 22
  • IMG_20211023_165823.jpg
    IMG_20211023_165823.jpg
    133 KB · Views: 23

Users who are viewing this thread

Back