**** DONE: 1/32 F4U-1A 17740 - Allied Manufactured Aircraft

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Thanks!

Here are some pre-chipping photos. I was able to do the two blues freehand but the white had to be masked. It was splattering absolutely everywhere and I have no idea why. I did end up mixing some grey in. Next up is chipping, then I'll do any touchups! The sun definitely washed the colours out in these photos. I couldn't get an angle of the other side as the sprinkler is running and I had to shield the plane...

DSC_0062_zpsdb50o2rr.jpg


DSC_0064_zpsn33yqafg.jpg


DSC_0065_zpsf2dmwzpf.jpg


I always have a hard time getting a good prop, what do you guys suggest?
 
I would think and always have though that the prop would be the flat black. all US WW II birds I've ever done has been in the FB but now that you bring it up? The birds on the show run you can never count on but I see both. (Mine from LSFM Fly in 2005)
 

Attachments

  • Picture 202.jpg
    Picture 202.jpg
    90.1 KB · Views: 95
  • Picture 203.jpg
    Picture 203.jpg
    80.1 KB · Views: 91
  • Picture 6833.jpg
    Picture 6833.jpg
    49 KB · Views: 81
  • Picture 6834.jpg
    Picture 6834.jpg
    53.9 KB · Views: 83
  • Picture 6836.jpg
    Picture 6836.jpg
    50.5 KB · Views: 96
  • Picture 6915.jpg
    Picture 6915.jpg
    51 KB · Views: 88
  • Picture 6916.jpg
    Picture 6916.jpg
    61.5 KB · Views: 80
  • Picture 6917.jpg
    Picture 6917.jpg
    63.2 KB · Views: 79
  • Picture 6925.jpg
    Picture 6925.jpg
    55.3 KB · Views: 80
  • Picture 6926.jpg
    Picture 6926.jpg
    55.8 KB · Views: 88
  • Picture 7151.jpg
    Picture 7151.jpg
    42 KB · Views: 77
Don't get caught out by paint finishes on current restorations or airworthy warbirds. Most owner/operators will try to be as authentic as possible, but the longevity of their precious airframe is more important than some paint details, therefore some, such as prop blades, may employ a more resilient, 'modern' surface coating, often in gloss rather than matt.
In WW2, 'allied' prop blades were mostly matt black, in order to reduce glare from the spinning prop arc ( a possible compromise of the camouflage effect from sun 'glint') and prevent dazzle to the pilot. Also, certainly on 'Jablo' -type wooden props, the 'black' was actually a membrane of a rubber material, to assist with the above and prevent moisture penetration of the wooden blades. This, when new, was semi-matt black, but quickly degenerated to more of a 'tyre colour' , more very dark grey than black.
 
Well, here is the plane immediately before decals. The chipping worked well. I may have gone overboard a bit but the areas I hit got pretty beat up, but overall I'm happy. What I'm also very happy about is that when I went to do some touchups with the intermediate blue, it sprayed nicely enough so I was able to get rid of the sharp line between it and the white.

DSC_0066_zpsuseiwsaf.jpg


DSC_0067_zpsjk9tltg0.jpg


DSC_0068_zpsgyopsrod.jpg


DSC_0070_zpsjcpmp8vj.jpg


DSC_0072_zpskjqh7sya.jpg


DSC_0073_zpseqtxeff4.jpg


And a bonus dog picture.

DSC_0074_zps23jfwqt5.jpg
 

Users who are viewing this thread

Back