Airframes
Benevolens Magister
Looking good.
**** DONE: 1/48 P-51D - Allied Advance and Defense of the Reich WWII.
- Thread starter Donivanp
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Crimea_River
Marshal
Yes, it is.
fubar57
General
Nice, finish line is near Don
- Thread starter
- #164
Donivanp
Captain
Ran into a problem putting on the clear coat to night.
I ended up with a couple of black smudges and I think it was my glove. Should have used a clean glove.
The wing is less of an issue then the fuselage. It is Testors Aluminum paint. The Fuselage is the Alclad. Well see how the fixes go as this has come to far to be snatched from victory by the jaws of defeat.
I ended up with a couple of black smudges and I think it was my glove. Should have used a clean glove.
The wing is less of an issue then the fuselage. It is Testors Aluminum paint. The Fuselage is the Alclad. Well see how the fixes go as this has come to far to be snatched from victory by the jaws of defeat.
Crimea_River
Marshal
Should be able to clean those up easily Don.
- Thread starter
- #166
Donivanp
Captain
Found while repairing, that the clear coat is the cause.
fubar57
General
No luck with this GB at all Don. Hopefully you can fix it up
Airframes
Benevolens Magister
Hope you can get it fixed Don.
- Thread starter
- #170
Donivanp
Captain
Well I called it done. The Alclads are great, but, if your not used to working with this lacquer then there is a learning curve. My problem cam in with the Klear coat. It is also lacquer and any place I touched while it was not dry, it took off all the original down to the base coat, This also included the enamel paint. Some soft sanding and rough masking worked to fix most of it. I'll be using again but remembering what I've learned. It's no show stopper but it is a learner.
them
Users who are viewing this thread
Similar threads
