Thanks all. Wojtek, those pics are good but, again I can't tell if the basket is natural metal or RLM 02.
Anyway, here are shots to catch up on progress. The Milliput seat cushion has been painted and drybrushed to represent scuffed leather and the kit PE seatbelts were then installed. Straps for the cushion are fashioned of painted Tamiya tape.
One needs to decide early whether to pose the aircraft with the cowl removed or closed as the number of bits to install on the gun deck and engine depend on that decision. I've decided to close the cowl so painting and detailing of the gun deck are not an issue. The instrument panel is PE and supplied with the kit. The dials are on a separate sheet and are sandwiched between the flat plastic backing and the outer PE panel with the bezels. Various PE levers and T pulls have also been added and the instrument faces got dabs of white glue to represent the glass but this is not really visible in the pics.
The fit of the parts is excellent.
Here we have the oil cooler which is made up of 5 parts, including the two PE grilles. The intake splitter slots into the grille. I had actually messed up on assembling this part as the radiator ended up too far forward and, as a result, the duct didn't fit properly into the fuselage. There is a stop that positions the radiator but I didn't quite line it up and this makes a big difference as the fit is quite precise. Fortunately, I was able to separate the cooler from the duct and reset it in the correct position.
At the tail end, I brushed black into areas that might be seen through the small tail wheel opening. I wasn't too fissed about getting a nice finish here as it's just there to create more shadow. Not that Eduard have provided the tiny screw jack that adjusted the tail plane incidence. Very thoughtful.
That's it for pics for now. As I said earlier, I've actually now got the fuselage haves glued together and curing so even if I wanted to change the basket finish, it's now probably too late.
Thanks to all for your interest and comments.