**** DONE: GB-46 1:48 Jaguar GR1A - WW2 Eastern Front / Twin Engine A/C, Transports and Gliders

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

So today i got the fuselage together, i forgot to take a picture of the cockpit tub before i closed up the fuselage sides !

USER_SCOPED_TEMP_DATA_orca-image--554244318.jpeg


Tackled the rather complicated Jaguar main landing gear.

The parts, there is another small right angle part i hadn't seen until I'd taken this pic

USER_SCOPED_TEMP_DATA_orca-image-295925799.jpeg


Both sides assembled, went together amazingly well once I'd figured out how it should've looked like.

USER_SCOPED_TEMP_DATA_orca-image-886313719.jpeg
 
Good stuff - did you rememebr the nose weight ?
BTW, I've got a shed load of detail pics I took at Cosford and Newark, including the main and nose gear, speed brakes etc., if you need them.
 
Good stuff - did you rememebr the nose weight ?
BTW, I've got a shed load of detail pics I took at Cosford and Newark, including the main and nose gear, speed brakes etc., if you need them.
yep i remembered to put weight in the nose !

i also have the Aero detail book on the Jaguar which though in black and white have great detail pictures and descriptions, it was this i consulted when the instructions called for yellow chromate primer :lol:
 
Thanks guys.

another full day working on this.
added aerials and other tiny bits to the lower rear fuselage

USER_SCOPED_TEMP_DATA_orca-image-1614330294.jpeg


then the ventral strakes

USER_SCOPED_TEMP_DATA_orca-image--2001889219.jpeg


Elevators and fairing on tail

USER_SCOPED_TEMP_DATA_orca-image--1833923403.jpeg


Heres where it sits now, gaps still not perfect but are better than they were and the ip is loose again !

USER_SCOPED_TEMP_DATA_orca-image-1204671996.jpeg
 
So yesterday i painted the Jaguar ocean grey.

USER_SCOPED_TEMP_DATA_orca-image--1437006022.jpeg


this lunchtime i drew on the camouflage boundaries for the dark green using a pencil.

USER_SCOPED_TEMP_DATA_orca-image-1970060378.jpeg


Then spent 90 minutes or so painting on the dark green and am pretty happy !
There are some areas i need to mask and paint black and also need to mask and paint the lower rear fuselage aft of the jet nozzles aluminium, then paint a few blade antenna a tan colour.

USER_SCOPED_TEMP_DATA_orca-image-1321563548.jpeg


USER_SCOPED_TEMP_DATA_orca-image-1107110587.jpeg
 

Users who are viewing this thread

Back