**** DONE: GB-60 1/72 Me 209 V-5 - Zombie Build

Fuselage closed up. I drilled out the nose guns. I also cut the elevators and rudder off so I could pose them deflected. I was going to do the flaps as well but couldn't find any pics of how they would look. The wings fit pretty good with minimal mud needed topside. Underside is a different story. Needs lots of mud and sanding to get them to blend in with the fuselage.

Me209 (21)r.jpg


Me209 (22)r.jpg


Me209 (23)r.jpg
 
Good work so far!
 
Into the paint and beyond. I fixed up the gap in the lower wings so they blend in nice with the fuselage. Re-scribed a few panel lines erased with sanding. Now the paint mystery, The instructions show an RLM 74 mottle over an RLM 75 on the whole upper surface. So far I have not found any pictures where the upper surfaces were painted in this way ? I'm going to do a traditional pattern with splinter camouflage on the upper surfaces and mottled affect over the RLM 76 on the sides. I don't want this to be a "what if" build but wow, the info is sparse !

Me209 (25)r.jpg


Me209 (24)r.jpg


paint2.jpg


paint1.jpg
 
very nice work :thumbright:
 
Some paint progress this weekend. I decided on RLM 74/75/76 as the paint scheme and used the splinter pattern on the upper surfaces. I;m not entirely happy with the mottle on the sides but I'm going to let it go. I can spray nice small areas with my airbrush but it tends to get all finicky as I go along. Time for some better equipment maybe....Santa?........


Me209 (26)r.jpg
 
Last edited:
:thumbright:
 
Looks good so far!
 

Users who are viewing this thread

Back