**** DONE: GB-61 1/48 Kawanishi N1K2-J Shidenkai (George) - Carrier and Maritime Aircraft

[le_steph40]

Username: le_steph40
First name: Steph
Category: Advanced
Manufacturer: Hasegawa 09663
Model: Kawanishi N1K2-J Shidenkai (George) 301st Hikotai "Shinsengumi"
Scale: 1/48
Addons: SBS Model 48027 1/48 cockpit set and Montex SM48049 canopy masks

The kit

In the box

And addons

 

[Wurger]

 

[Crimea_River]

Good one,

 

[Vic Balshaw]

Brilliant Steph and I like all the add-ons.

 

[Wayne Little]

Sweet...!

 

[A4K]

Should be nice Steph.

 

[fubar57]

Good one Steph. I've built three: two Hasegawa and one Tamiya

 

[le_steph40]

Hello,
The cockpit is ready to be installed in the fuselage. I chose a color close to FS34127 a little faded. It seems that the color behind components were in this shade (FS34127/FS34097). The FS34258 that we often see seems to me the original color very faded/weathered. But that's just my interpretation


Hasegawa notes that the access hatch behind the cockpit on the starboard side for the raft need to be deleted for the wide chord fin variant (the one I'm building). It's clear that the narrow variant had this access hatch but I couldn't find anything on the subject regarding the wide variant. Any infos about it please ?
I haven't the Aero Detail #26...!!!

 

[Wurger]

 

[Crimea_River]

Great paint work on the cockpit Steph. Sorry but no idea about the hatch. Maybe fire a note to Shinpachi.

 

[Vic Balshaw]

What a great looking cockpit, excellent detail.

 

[fubar57]

I have several book on the Shiden but they are in Japanese so not sure what I am looking for. They have line drawings but they show the upper left side and lower left side on the same drawing

 

[Gnomey]

Good work so far!

 

[captain Frey]

Hi Steph,
good start, nice cockpit.
I'm surprised that you use vinyl masks which are more difficult than kabuki ones.
I looked at my doc, but I don't have this part of the fuselage for the version that interests you on my plan (Maru Mechanic 43 11/1983), so for the hatch I don't know....I'll look in my books today if I have a beautiful photo that shows this place.
I think you can trust Hasegawa. There is a fairly learned Japanese person on this forum, you could ask him.

 

[Wayne Little]

I removed that same panel in my 1/32 build years ago, I will have to check a couple of references....

 

[A4K]

All my references only shown port views(!), so unable to help sorry Steph.

 

[le_steph40]

Hello,

Hi Steph,
good start, nice cockpit.
I'm surprised that you use vinyl masks which are more difficult than kabuki ones.
I looked at my doc, but I don't have this part of the fuselage for the version that interests you on my plan (Maru Mechanic 43 11/1983), so for the hatch I don't know....I'll look in my books today if I have a beautiful photo that shows this place.
I think you can trust Hasegawa. There is a fairly learned Japanese person on this forum, you could ask him.

Pascal,
I didn't succeed to find Eduard or Dead Design Models (I prefer) available in stock. So, it will be Montex
Maybe we can trust Hasegawa but I wanted a confirmation because I thought this hatch appeared from the N1K2-J model (independently the narrow or wide chord fin variant).

I removed that same panel in my 1/32 build years ago, I will have to check a couple of references....

And it's the problem Wayne, I found the 2 versions (with and without this panel hatch for this wide chord fin variant) on the web.
In my docs, as Evan noticed, I also only found plans of port side views. The profiles are sometimes with and sometimes without this hatch...

Well, for the moment, the cockpit is in the fuselage and we don't see much anymore when it's closed

 

[Wurger]

 

[fubar57]

 

[Vic Balshaw]

Nicely done Steph.