**** DONE: GB-68 1/48 Fw-190A-8 - We all build Fw 190 (2 Viewers)

interested to see that works out Andy
I've tried it once, and same as you found it initially appears very crypto camo vs natural variation and weathering
I haven't played around with it any more, so interested to see how it develops
I would hazard a guess that magic combo of spacing, layers and thickness would work out extremely well
 
Yes, I think that's the key. Also, colour variations. The AK RLM 76 is very grey and my custom mix of Tamiya paints is a bit bluer. Once the AK is on, I'll go over everything again with patches of varying shades.

Here's a good example of the effect I'm trying to get, though this is on a 1/32 kit.

1768232742372.png



Full thread of this superb build is here: Hasegawa FW 190A-8 Gustav Salffner, 7./JG 300
 
Interesting effect, Andy. I was looking at something similar from Uschi van der Rosten
 
Thanks guys. Underside base painted and glossed.

260102002.jpg
260102001.jpg
 
Interesting effect Andy, well done.
 
Thanks guys. I posted this over at Britmodeller as a general question but would be interested in your thoughts as well.

The JG300 Blue/White/Blue RV Band appears on various models, profiles, and decal sheets with a wide variety of blues ranging from a light sky blue to aqua to quite dark. I've not found a reference to say what RLM designation this blue is suppose to be but am guessing RLM 24 Dunkelblau (Dark Blue) as there seems to be no other marking colour that would fit. The shot of Salffner's 190 on page 1, reproduced below, shows what seems to be a quite light blue, much lighter than I would expect for RLM 24.

1ae813f3fd27b5902ba47180ca9bcca7-jpg.jpg


Is it supposed to be RLM 24? If not, what? If 24, did this stuff fade quickly to a much lighter shade? Thoughts appreciated.
 
Thanks Geo. Yeah definitely JG300. Well covered in the 2 volume Lorant and Goyat tome on the unit.
 
Upper camo applied after painting and masking the white part of the RV band. I used more of the mottling mask technique, applying white, black, and some left over RLM66 grey that I used to paint the canopy frames.

Mixed batch of RLM75 sprayed on. The mottling effect actually shows up more stark on these photos than in reality.

260102602.jpg
260102603.jpg
260102604.jpg


Then Green RLM81 was then applied. The demarcations with the 75 are done freehand. Again, the mottling effect shows up much more stark in the photos for some reason. In reality, the effect is much more subtle and more pleasing to me than these photos suggest.

260102605.jpg
260102606.jpg
260102607.jpg
260102601.jpg


Looks like I missed a bit of green above the exhaust panels, which need to be masked and painted black in my next session. Thanks for looking in.
 
Yes it does
 

Users who are viewing this thread

Back