**** FINISHED: 1/48 C-47A Skytrain - Jet/Recon/Transport GB (1 Viewer)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

woody

Master Sergeant
2,334
20
Jan 17, 2011
IL.
username:WOODY
name:Jerry
category:intermediate
scale:1\48
manufacturer:Trumpeter
model:C-47A
aftermarket:none

This was built as the 92ndTCS/439thCG
I liked this kit there was a couple trouble areas but overall a good kit and thanks for the help and pics.

001-63_zps50ebdfaf.jpg


002-56_zps0635a455.jpg


003-43_zps7de27e80.jpg


004-22_zpsec2368fb.jpg


005-20_zps8219c01b.jpg


006-16_zps70aa4e31.jpg
 
Last edited by a moderator:
Very nicely done. Just noticed, the escape hatch above the cockpit appears to be clear - these were alloy, and normally painted. Other than that, a great model - well done!
 
Thanks guys for the kind comments. Terry the reason I didn't paint the clear was the instructions showed this.

001-63_zps91c2ab47.jpg
 
Strange. I've never seen a clear hatch on a 'Dak', and apart from the thousands of photos, I've seen hundreds of the real thing, and flown in a few, including the cockpit, in the last fifty years. The inside of the hatch normally had the same padded, quilted sound proofing material as the bulkhead and part of the sidewalls, with a fairly substantial seating frame in the fuselage roof, and around the hatch itself.
But, at least you can see into the cockpit with a clear hatch! (Which might be Trumpeter's intention, as an option).
 

Users who are viewing this thread

Back