Fw190A6 Sturmjager of Sturmstaffel1 (2 Viewers)

THX lads.:) :oops:
 
Great work on the wings Wojtek, I'd have made a bollix of that if I tried it! :lol:

Has anyone emailed a link to this thread to Academy? They need to see how a 190 should look.
 
Wojtek the master!:notworthy:
 
Oh... :oops: thanks guys.I appreciate !!!! :p

For my farther work I needed to make a pattern for the accessing panels of the outer MG151/20 cannons that were on the undersides.These on lower surfaces of the model wing are of incorrect shape totally. For that purpose I bought a can of beer and made it empty by drinking ( quite tasty was :lol:).Then I cut open the can and made the aluminium plate flat.Second step was to use drawings that I printed on the adhesive transparent foil.The panel was cut off and sticked to the plate.Then using drills I made some holes and cut down the panel with a scalpel razor.For finishing edges and getting a proper shape I used files.
 

Attachments

  • szablon1.jpg
    szablon1.jpg
    110.7 KB · Views: 338
  • szablon1a.jpg
    szablon1a.jpg
    101.6 KB · Views: 334
  • szablon1b.jpg
    szablon1b.jpg
    92.2 KB · Views: 351
  • szablon1c.jpg
    szablon1c.jpg
    140.1 KB · Views: 351
What we men have to suffer through, eh? Be strong Wojtek, we're all here for you in time of need! :lol:
 
Not especially Terry.But I don't suggest any glue, paints etc.. drinking. :lol:

Thanks Jan and Marek. :D

Here next pics of the work progress.The first step was to sand off these panel projections.Then I used Superglue as a putty to fill the wrong panel lines.
 

Attachments

  • wing5a_2.jpg
    wing5a_2.jpg
    81.8 KB · Views: 199
  • wing5a_1.jpg
    wing5a_1.jpg
    72.3 KB · Views: 186
  • wing5a_.jpg
    wing5a_.jpg
    74.2 KB · Views: 187
  • wing5a.jpg
    wing5a.jpg
    80.9 KB · Views: 180
  • wing5_.jpg
    wing5_.jpg
    86.3 KB · Views: 168
  • wing5b.jpg
    wing5b.jpg
    77.8 KB · Views: 236
  • wing5b_.jpg
    wing5b_.jpg
    74.8 KB · Views: 205
Great stuff, and so accurate, Wojtek. Amazing!
 
I agree with Marek, you are the best company and I don't want any other. :p

OK. Here a couple of shots that show the work on these panels to its end. The next step was sanding the Superglue with
a nail-file and then engraving.
For that I used a thin needle and the Trumpeter engraver.Two last pics let see the effect of this.
 

Attachments

  • wing5f_.jpg
    wing5f_.jpg
    99.5 KB · Views: 175
  • wing5f.jpg
    wing5f.jpg
    86.6 KB · Views: 317
  • wing5e.jpg
    wing5e.jpg
    93 KB · Views: 346
  • wing5d.jpg
    wing5d.jpg
    70.2 KB · Views: 235
  • wing5c.jpg
    wing5c.jpg
    80.7 KB · Views: 190
  • wing5g.jpg
    wing5g.jpg
    70.9 KB · Views: 342
  • wing5g_.jpg
    wing5g_.jpg
    70.6 KB · Views: 246
Permission to swear! :shock:
 
THX Gents. :p

BTW I have sanded off these rivets from leading edges that remind me nails rather than rivets.
 

Attachments

  • wing6a.jpg
    wing6a.jpg
    62 KB · Views: 175
  • wing6.jpg
    wing6.jpg
    77.5 KB · Views: 163
Also I started making corrections to the main landing grear bays..the first step was to remove "interiors" of the wheel bays......a couple of pics here.

To be continued.....
 

Attachments

  • podwozie1.jpg
    podwozie1.jpg
    72.5 KB · Views: 159
  • podwozie1_.jpg
    podwozie1_.jpg
    115.8 KB · Views: 161
  • podwozie1a.jpg
    podwozie1a.jpg
    116 KB · Views: 145
  • podwozie1a_.jpg
    podwozie1a_.jpg
    117.9 KB · Views: 164
  • podwozie1b.jpg
    podwozie1b.jpg
    110.1 KB · Views: 170

Users who are viewing this thread

Back