GB-42 1/48 B-25J - MTO II

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Thanks Andy, Trying my hand at using colored pencil. I'm working with the silver and the black mostly right now. I've found you can put it on and then rub it down with you finger and if to much a little spit on the finger will clean it off. (Ouwww)

IMG_20190613_122544893.jpg
IMG_20190613_122551791.jpg
IMG_20190613_122559536.jpg
IMG_20190613_122604429.jpg
IMG_20190613_122609103.jpg
IMG_20190613_122614487.jpg
 
Coloured pencils are good. I have also used them in shades of green, Brown, or grey that are slightly different than the background colours. Random specs and along panel line edges gives some nice depth to the colour and suggests wear. See close ups of my recent Hurricane build from the last GB for examples.
 
I know it's been a while since I've posted anything, but the hours at work have gone up and A/C is not working with the outside temps at 95F to 98F with the "feels like" temps at 107F to 112F, I just have not found the time and initiative to go upstairs and work much. I have been working but slowly.

The kit kit is moving along nicely, that is till I tried to mate the bombardier upper screen on and found everything out of whack. The lower section seems to have been warped and I think I noticed it when I installed in but.... Oh well I have a fight on my hands. for give some of the blurry photos, please!

IMG_20190715_164209849.jpg
IMG_20190715_164219701.jpg
IMG_20190715_164236494.jpg
IMG_20190715_164245742.jpg
IMG_20190715_164253012.jpg



Good news I got the Eduard mask kit for the kit!

IMG_20190701_211301424.jpg
IMG_20190707_202614585.jpg
 

Users who are viewing this thread

Back