Thanks guys. Started painting tonight but the prep work started around 10 this A.M. The instructions say to paint the lower surface of the wings "Aircraft Grey". Revell wants them painted semi-gloss white. Off to the "RCAF 1968 - 2004" book says "....and Grey 501-109 lower wings was carried on into CAF use." What the hell is 501-109? A shufti through this site
RCAF/CAF and CDN Army Aircraft shows a colour chip (don't start on cpu renderings), a description of what its used on and how to attain it...
XF-12....I have that....and its in the old large bottle. An oooooooooooooooooooooooooooold bottle. I look through the glass and see about 3mm of paint left. I tilt the bottle.....the paint doesn't move. I open the lid and look in.....there are cracks running across the paint. I poke a toothpick into it and it is still soft. I've already been through my pa
int stock, three times and no other bottles of XF-12. I've got other bottles of light grey but nothing with a "
bluish-grey appearance". Desperation time. At 11 A.M. I pour about 3-4mm of 99% IPA into the bottle, close the lid and start shaking. I keep shaking on and off until about 3 P.M. and open the lid....the IPA has turned grey. I grab a toothpick and start stirring, I can feel the bottom of the bottle. I lift the toothpick and the paint drips off, roughly the same consistency as good paint. I transferred some to the AB cup and put an equal amount of IPA in. Success though its hard to see. I did one single seater at the same time.
The bottle has been sealed tightly in case touch-ups are needed. Once all is said and done, the bottle will be chucked and a new one will take its place. Offhand I think the bottle was close to or over 15 years old. Taking a tip from Andy, I'll gloss coat the later and continue on.