- Thread starter
- #21
imalko
Chief Master Sergeant
New update on the build... Main paint job is done and I started to work on the canopy. I've managed to adjust the forward part of the canopy by careful sanding so it now sits just right on the fuselage. However there's still a gap in the aft part so here some sort of filling will be needed to close it. I might try Terry's suggestion from few posts back. Another unplanned issue was with the spinner, which was of noticeably smaller diameter then the forward fuselage. I've fixed this by adding thin plastic plate on the base of the spinner enlarging it's diameter.
Attachments
Last edited: