- Thread starter
- #61
le_steph40
Chief Master Sergeant
Hello,
Some work: wings glued with some modifications to add
Some work: wings glued with some modifications to add
GB-62 1/48 Spitfire Mk.IX - Spitfires (1 Viewer)
- Thread starter le_steph40
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Crimea_River
Marshal
No IFF antenna hatch. So does that mean this aircraft had the "cheese-cutter" IFF wires from the tips of the horizontal stabs to the fuselage?
Airframes
Benevolens Magister
By that time, the "cheese cutter" IFF was long gone. I would have thought that this aircraft would have the dipole IIF antenna under the starboard wing.
Crimea_River
Marshal
I agree but thought I'd ask because I recall seeing a photo of an early IX converted from a V that had the wires still. EN398 I believe.
Good work so far!
- Thread starter
- #67
le_steph40
Chief Master Sergeant
You're right Andy, this aircraft had the "cheesse cutter" IFF wires
Ralph Haus
Tech Sergeant
Ooooh! (uttered in the sound of a discouraged sigh). I'm so confused on this area, what article, author, should one believe??You're right Andy, this aircraft had the "cheesse cutter" IFF wires
- Thread starter
- #69
le_steph40
Chief Master Sergeant
My source it's a photo of the aircraft Ralph
- Thread starter
- #70
le_steph40
Chief Master Sergeant
Hello,
The work of these last days:
Some work/modification on the engine hood
I glued resin wing tips and added putty; sanding and re-engraving soon...
Work on the landing gear with some problem to fix...
But I decided to use Eduard leg covers for a better shape => done !
The work of these last days:
Some work/modification on the engine hood
I glued resin wing tips and added putty; sanding and re-engraving soon...
Work on the landing gear with some problem to fix...
But I decided to use Eduard leg covers for a better shape => done !
fubar57
General
Nice fixes
Berny5664
Airman 1st Class
Great changes
Crimea_River
Marshal
Good dealing with those fine details as always.
- Thread starter
- #75
le_steph40
Chief Master Sergeant
Hello,
Work on some details
The next work will be to install exhausts and engine hood before the assembly wings/fuselage and I think this step will be "sporty"
=> sand to get the correct fit, paying attention to the dihedral...!!!
and put wedges in the fuselage to correct the gap (or maybe some putty)
Work on some details
The next work will be to install exhausts and engine hood before the assembly wings/fuselage and I think this step will be "sporty"
=> sand to get the correct fit, paying attention to the dihedral...!!! and put wedges in the fuselage to correct the gap (or maybe some putty)
Berny5664
Airman 1st Class
Well done
Vic Balshaw
Major General
A few nice little additions Steph, not liking those gaps though but I know you'll fix them. 
fubar57
General
Good fixes
Crimea_River
Marshal
It's going great in your capable hands.
