Mitsubishi G3M3 Nell 1/72 Arii

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

destrozas

Senior Master Sergeant
3,162
607
Jan 12, 2010
I present another project I'm doing, I like mitsubishi me say that the model is cast as you will see very old lace and there not too much detail but from the outside.




as I put the kit for this plane eduard I will detail some inside without much complication by the scale and the limited vision of the interior, only the most visible.



fastening the first trim the wing to not see the inside


I place the structure that is the interior trim of 0'13mm plasticard sheets into strips 0'5mm the fa hit the mark so that the plane (the plane from the book book-burnin do model 22)




I make the platform which could go by La the plane from the cockpit to the tail



I make the platform which could go by La the plane from the cockpit to the tail
do the different platforms for photo-etch





cockpit



command that is not what will put you and that will scale and I am building one from a ki-46ii mitsibishi is other than I'm getting a slower run.

 
Last edited:
thanks all
has not gone all the good I expected but the question prncipal good engines are quite acceptable.









 
after several days of work without rest and other vacation you've been made ​​uqe wear what at the moment
first base, do lights with brown earth, yellow green and white light strikes within seconds of the windows.







I give the color in him so I could find and fix the color was similar to FS 34255 or according to Japanese standard N6. I got it from a mixture of paintings by Gunze H-6 50% + H4-30% + H7-20% taken from the Italian magazine modellisme aerei







To give some depth with oil color acrylic burnt sienna shade and gave it to him to take into some dirt and so give depth











Now give me a light hand is above all to unify the colors and shapes, so step to kill the shine of the metal that gave the effect of peeling paint.
 
Thanks to all
wayne little is true that the color looks great inside where they took him out an article where they were giving each color photos of interiors and painted after comparing certainly very good.
the theme of painting the interior and this ended, I gave him a light coat of 80% water and 20% paint to unify the golden olive color, lying low pressure and paint 0'2mm shutter box for box so there is more effect of shadows and lights. photos are not much but at the moment are that I have to recharge the battery until the camera is not much but at least you can see the variety of colors.



 
for some problems I had to spend a few days without being able to do many things today I put what little I could do.












Finally, a vita of the plane inner closed



 
I have the project not only left a little left side to airearme ideas on what model do.
I leave like this






colors are indicated by the instructions of Arii
green H59 vallejo modelo color 979
A= H4 60% + H2 5% + H3 5% + H7 30% vallejo model color 953 60%+861 5%+908 5%+872 30%
 
with paint and dry, natural light is this aspect that has painted with airbrush and freehand







with paint and dry, natural light is this aspect that has painted with airbrush and freehand
as seen in the pictures using the two colors that go to a panel and paint the intrados (lower) are the air model 71052 and 71046 model air to lower the overall color







the paint is still wet so that the effect is very noticeable when dry further underline.
 

Attachments

  • e1ebbb60.jpg
    93.6 KB · Views: 165
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

D
1:72 Revell PT-13
Replies
7
Views
776
Lucky13
R
Arma Hobby 1/72 P-51C
Replies
8
Views
760
Ruud
Tamiya 1/72 F4U-1D RNZAF
2 3 4
Replies
78
Views
4K
Lucky13
Academy 1/72 B-17E “Pacific Theater”
Replies
9
Views
1K
Vic Balshaw
T
1/72 A&A Models Northrop F-15 Reporter (aka photo-recon P-61 Black Widow)
2
Replies
35
Views
522
fubar57
Menu
Log in
Register