My FIRST WORKBENCH : NAKAJIMA A6M2-N type 2 Hidrofighter (RUFE) 1/48 Tamiya (2 Viewers)

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Taking up the process (I was away for work) :shockingzap:

I hope not to be boring :rolleyes:, but try to be as clear as possible for those who try for the first time or see it as an option in their modeling techniques.
And will always be welcome comments and suggestions from the experts on the forum. :arrow: :idea: :D

To get started in this of chipped and apply a few techniques for this purpose ... give a good painted around the hydroairplne base with AS-12 Bare-Metal Silver Tamiya.

2014-05-20213808_zps11c5d649.jpg


2014-05-20213820_zpsa00615d2.jpg


2014-05-20213846_zps8faf0f03.jpg


2014-05-20213920_zps1faaeb73.jpg


2014-05-20220055_zps87315d24.jpg


2014-05-20220143_zps9aabc1b8.jpg


2014-05-20220312_zps7244b658.jpg


for the same effect paint the cowling and the same tone for the final color of the cone and propeller.

2014-05-25120200_zps40cdcc76.jpg


a real photo ...

img559_zpsa84b7c46.jpg


let the silver color cure for 3 days and gave him a coat of varnish to further protect the silver when applying salt and liquid mask for chipped and exterior colors ...

2014-05-21102948_zps0a25df60.jpg


I attended at the inter some details ... :rolleyes:

1) The improvement (as required) regarding pitot piece of kit. :!:

On this occasion I will use (first time for me) 3 different sizes of hypodermic needles :lol:

2014-06-02214604_zps15889f04.jpg


tools also use the Dremel

2014-06-02222142_zps7eceea96.jpg


Use a lime to remove the blade wider needle. To retrieve the pin hole damage suffered.

2014-06-02222226_zps352bc576.jpg


Black introduce yellow needle, at least to cover the sharp tip (the edged serves to facilitate the maneuver)

2014-06-02225455_zps099f1767.jpg


I had not tried ... and cut the needles with the Dremel was very simple :thumbleft:
(IMPORTANT consider the best personal protection measures-most clean place obstacles operating the Dremel, safety glasses, tweezers to manipulate the needles, good lighting, etc.)

2014-06-03124930_zps65f7ade5.jpg


2014-06-03125107_zps27eb4dd3.jpg


2014-06-03125324_zps4da80951.jpg


...to be continued...:arrow: 8)
 
Cut the black needle estimated the distance, and then refine the measure ... and enter the blue, give the cut to fit, file and move on.

2014-06-03130427_zpsfb82976b.jpg


2014-06-03131423_zpsb13c86b3.jpg


2014-06-03132911_zps11c07d97.jpg


the basis of the cut needles will serve for some rivets and / or details :idea: 8)

2014-06-03133305_zps1cccfe83.jpg


2) We spent washing, filing, polishing and masking the 3 pieces of the cockpit ... (said quickie, but it take me long to achieve it, after 2 or 3 fixes)

2014-06-03170146_zps68858b7c.jpg


2014-06-03200409_zps394d0d32.jpg


2014-06-03215253_zps2ce66837.jpg


an overview ... hahaha :oops:

2014-06-03215508_zps9b3b5ffa.jpg


a pair of real photos ...

img600_zps59f1cbca.jpg


img602_zps53b2ef41.jpg


3) The back of the propeller blades are in a matte tone, a little research could see normally (at least the Japanese), painted it black or dark brown ... and I found this picture:

358_zps208a93a3.jpg


and as forth above

img559_zpsa84b7c46.jpg


So use them as a reference, I masked to paint that section

2014-06-02191419_zps9e4e0ab6.jpg


2014-06-02191439_zps224f91f9.jpg


Avoiding the classic matte black, the colors chosen, diluted and mixed to 50% ..

2014-06-10123729_zpsc5768e9f.jpg


2014-06-10125359_zpsfa2fe40f.jpg


Let it dry and see how they look and will soon upload more of the process ...

Thank you for your visits and do not forget to write your questions, criticisms and comments ... I appreciate them and are all important.


see you soon :salute:
 
Hello again, thanks for your visits and comments.

for now ... the propeller blades remained as well.

2014-06-16174107_zps32fdecc7.jpg


2014-06-16174020_zps3dfb452f.jpg


:arrow: :idea:
...the time of use that much talked about technique of salt and / or liquid mask ... and release it in this hydroplane is approaching ...

Lacking models "Conejillos de Indias" (do not know how you say in English :oops:...- guinea pigs -, - test articles -, - surplus -.. Etc) ... I have completed only 6 planes in my new era ... and I have endeavored to everyone, as for "arriezgarlos" or screw up the lateness on this onealthough all have a remedy, I better avoid it - lol -:!: ... I decided to do some tests, for which I used a piece and plastic to resemble as much as possible panels and rivets aircraft ... I worked with.

Let the pictures who speak:

2014-05-27123052_zps6505ffad.jpg


2014-05-27123228_zps9544d930.jpg


I did not put "Primer" to my Hydro (only I polished and washed conscientiously) before applying the metal color ... so I'll try a difference to test it with "Primer" applied to half of my "Conejillo de Indias". Sanded, and polish then apply silver.

2014-05-27132200_zps8768deaf.jpg


2014-05-31201415_zps52f10803.jpg


2014-06-02174608_zps4437b5b9.jpg


We let the paint cure ... while I will work on further developments ...

I painted the wheels of the transport cart, watching and trying to understand the best possible the images found ... I concluded that the "wheels" have been a "solid rubber" and painted with Humbrol 33 Matt Black and 27 Matt and Sea Grey (if anyone has knowledge or experience, I appreciate your comments on these tires)

2014-06-09194705_zpsb9ab1589.jpg


So far this brief preview. :(

I appreciate your company in this process.

Greetings great !! :shaking2:
Luis Carlos
SANCER
 
I thank most especially your comment Crimea River :oops:, as I mentioned, in this model I want to apply some new techniques for me and I want to do with time and dedication.

And I want to leave witness to how I did, in addition able to offer the choices to who is interested and receive feedback which is required.

With advisors in aviation modeling and experts like you, I will learn a lot. :p

Muchas gracias amigo. :thumbup:
 
Hi Wayne, you hope you are well. :lol:

I appreciate your comment and interest in my project. If your question refers to the color of the fuselage to take my Nakajima, my intention is to make the version of:

11th Air Flotilla (Embarked on Seaplane Tender Kamikawa Maru)
Shortland Iseland Seaplane Base, Solomon Islands.
September - November 1942


And the seaplane has the light gray in its entirety and the cowling in characteristic blueish black (black Aotake)

(It's a retouched photo and the colors are not reliable, but gives us an idea) ;)
ZEROSUIa_zpsd7c492ef.jpg



I will need your advice and recommendations :idea:, I will put all my effort and I want this Japanese be the start of my modeling seriously.

Much obliged. :thumbup:
SANCER
 
Thanks Jan, for your words. :thumbleft:

I will take advantage to post the progress I have. :confused:

I prepared cockpit pieces for painting, first color inside the cabin.

2014-06-10114904_zps3f5119eb.jpg


2014-06-10114930_zpsd5b84d4d.jpg


the well known combination of these colors.

2014-06-10122010_zpsc7939e54.jpg


In the next picture is observed the last time I saw the left aileron actuator.

2014-05-20213808_zps11c5d649.jpg


during the last general cleaning to the airplane when I realized it was gone the mini-Piece !! :cry:. Search it was useless so I looked a branch that had the approximate dimensions and practiced the "mini-esculturismo" (miniature sculptures) and try to "duplicate" the piece with the reference of the right actuator. :shock:

2014-06-11170253_zps5b31103a.jpg


2014-06-11170411_zps7a474fab.jpg


2014-06-11172949_zpsa5227e37.jpg


Let the photos speak the continuity of the left actuator replenishment. 8) :arrow: :lol:

2014-06-11173237_zpscb3d8316.jpg


2014-06-17215245_zpsb11196fe.jpg


2014-06-17215743_zps5ca5b39f.jpg


2014-06-17220715_zpsb4875f72.jpg


2014-06-17221841_zpsd88eb3dc.jpg


The next thing was to put the new actuator into the hole and corresponding place. :-\"

The accident was resolved ... puff !! :rolleyes:

So far the progress. (Over 1500 views ... are pure inspiration) :idea: ;)

Muchas gracias amigos mios.
 
Last edited:
Madre mia ! muy, muy pequeno ;)

Jajaja :shock:!!...como vez estimado Siddley!!, ...voy a perder la vista!! 8)

Grrrrreat scratch work there.
Those little things just add so much to the finished build.
Well done.

Thanks Bill, I also think it's the little details that make a great job.
And :oops:... I'm working on it. :rolleyes:

Glad to greet you amigo.

Saludos.
SANCER
 

Users who are viewing this thread

Back