might be quicker than you think mate, missus says a parcel arrived today !
so i think Javelin has arrived within 24hrs of ordering, stuck at work till 10pm tonight so suspense is killing me ????
Recent Purchases
- Thread starter Heinz
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
so i think Javelin has arrived within 24hrs of ordering, stuck at work till 10pm tonight so suspense is killing me ????
Libations all around then!
Airframes
Benevolens Magister
Could be the long lost Consolidated product - the B-27 Libation ................
Well, I said no more than 2 today 
but I ended up picking up 7 at our local competition CAPCON 2013 ! Pictures to follow and a huge update on the F-86F sabre too since I've completed her, just need to post the build progress (was so busy down to the wire for CAPCON that I didn't have time to post)
Here are the pics
Sabre and DUAL combo Cobras Mk Is to boot
Wayne will love this one A6M7! I love this bird, such a nice kit in Hasegawa , Hasegawa Sabre, will be a good build this one and....Mig-15 Bis with cockpit set and masks included
I've been searching for this kit for 5 years, lusting after I picked up some decals for it, and today, MC. 205, cockpit set for it, vacuform canopies, Masks and some fancy Exhausts + the very same decals
and finally the best deal of the day, from the "silent" auction, $5.50 for what I originally thought was a 1/72 kit, but in fact its a 1/48 F-86F-40! JASDF !!! Can never have enough Sabres !
What an awesome time and although I didn't place, I enjoyed it immensely met some awesome fellow modellers from around the country and had a great time
but I ended up picking up 7 at our local competition CAPCON 2013 ! Pictures to follow and a huge update on the F-86F sabre too since I've completed her, just need to post the build progress (was so busy down to the wire for CAPCON that I didn't have time to post) Here are the pics
Sabre and DUAL combo Cobras
Mk Is to boot Wayne will love this one
A6M7! I love this bird, such a nice kit in Hasegawa , Hasegawa Sabre, will be a good build this one and....Mig-15 Bis with cockpit set and masks included I've been searching for this kit for 5 years, lusting after I picked up some decals for it, and today, MC. 205, cockpit set for it, vacuform canopies, Masks and some fancy Exhausts
+ the very same decals and finally the best deal of the day, from the "silent" auction, $5.50 for what I originally thought was a 1/72 kit, but in fact its a 1/48 F-86F-40! JASDF !!!
Can never have enough Sabres ! What an awesome time and although I didn't place, I enjoyed it immensely
met some awesome fellow modellers from around the country and had a great time 
Crimea_River
Marshal
Great haul Igor.
Aaron Brooks Wolters
Brigadier General
WOW!!!
Good stuff guys!
Good stuff guys!
prem895
Staff Sergeant
Good stuff
Lucky13
Forum Mascot
Most excellent!!
Well done...
Alex .
Airman 1st Class
Carrying on my Bomber Command theme
Me too, would love one in 1/48 !Very cool
I always loved the lines of the Hampden
Lucky13
Forum Mascot
Same here, come on Airfix!! 
Crimea_River
Marshal
Yes, that would be cool.
T Bolt
Colonel
Nice hauls guys
al49
Tech Sergeant
Not a new kit but something I found and bought last Sunday at the annual Model Show in Milan.
May be you know them already, but I found these products very good and I like to share them with you.
First is c.a. glue that seems to work very well with transparent plastic
Unfortunately my pictures aren't very clear but on my test the joint is very strong and clear plastic didn't suffered at all:
Second is a set including a thin c.a. glue and a dispenser of what they call "mineral sand"
Again I did some tests.
1. I filled a gap 2 mm wide by 17 mm long and after a few instant I a very hard joint that I was able to send it flat with a motor tool.
2. I glued a .25 mm thick piece of transparent plastic to a piece of plasticard at 90 deg angle and reinforced on one side only with the sand/glue mix: once more I got a very strong joint.
Honestly I don't know if these products are available outside Italy, may be under a different name, but here is the link for the Italian shop:
http://www.pulcher.it/
Alberto
May be you know them already, but I found these products very good and I like to share them with you.
First is c.a. glue that seems to work very well with transparent plastic
Unfortunately my pictures aren't very clear but on my test the joint is very strong and clear plastic didn't suffered at all:
Second is a set including a thin c.a. glue and a dispenser of what they call "mineral sand"
Again I did some tests.
1. I filled a gap 2 mm wide by 17 mm long and after a few instant I a very hard joint that I was able to send it flat with a motor tool.
2. I glued a .25 mm thick piece of transparent plastic to a piece of plasticard at 90 deg angle and reinforced on one side only with the sand/glue mix: once more I got a very strong joint.
Honestly I don't know if these products are available outside Italy, may be under a different name, but here is the link for the Italian shop:
http://www.pulcher.it/
Alberto
Last edited:
Airframes
Benevolens Magister
Interesting products Alberto - I can see some uses for both. Thanks for sharing.
Cool stuff, thanks Alberto!