Revell 1/32 He162 'Salamander'

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

OK.

Try using Google DNS server:

1. Open System Preferences and Then Click the Network icon.
2. Select your active network connection on the left, and then click Advanced
3. Click on the DNS tab
4. In the DNS Servers section, click the [+] button on the lower left
5. Type 8.8.8.8 and press enter
6. Click the [+] again, and type 4.4.4.4 and press enter
7. Click OK and then Apply

Your computer will now use Google's free DNS servers instead of your router/ISP's servers. Test it out, if you still have problems, simply follow the steps above but delete the 8.8.8.8 and 4.4.4.4 entries (highlight each entry and click the [-] button on the lower left). Your computer will return to using the default DNS server.
Also you may try to type the pair of IPs 208.67.222.222 and 208.67.220.220
 
It's not a problem for me. I'm on line almost all time.

BTW do you use a Firewall or something like that e.g.. the Little Snitch?
 
At last it's working(this post is from my Mac) I did what you said leaving the original addresses but it didn't work I then removed all the addresses and added the 8 and 4 ones, reset safari and it's all up and running!!!!. Thank you very much I will now be able post my updates with photos! Thanks again
 
I'm very glad I could help. But it's interesting, as far as I know trying to type new addresses , those old should be deleted when typing new ones. But there are more things in Heaven and Earth, than are dreamt of in your philosophy.

cheers,

BTW please check if both net browsers working properly and whether there is an access to all sites and pages you usually use.
 
Well here's my first update the fuselage is now buttoned up and there has been the need to re-scribe some of the panel lines, I have used dymo tape as a guide and a Trumpeter scriber. I have also had to use some very thin plastic card next to the gun bay as there was a significant sink area but all is good now.
 

Attachments

  • 131510_0245.jpg
    123.3 KB · Views: 97
  • 131510_0246.jpg
    97 KB · Views: 99
  • 131510_0247.jpg
    110.1 KB · Views: 93
  • 131510_0248.jpg
    128.6 KB · Views: 91
  • 131510_0249.jpg
    127.1 KB · Views: 93
Thanks for the info Vaughan. That's good there isn'y any problem with them. And a great work on the model.


Terry.. thank you very much for the promotion in rank!
 
I think I'm up to speed now the tail plane and wings are on. It's been a bit difficult to work out the correct dihedral of the wings but have consulted various line drawings so hope it's right. I've also just finished the gun and wheel bay doors.
 

Attachments

  • 131610_0252.jpg
    105.6 KB · Views: 108
  • 131610_0256.jpg
    79.1 KB · Views: 105
  • 131610_0257.jpg
    81.7 KB · Views: 110
  • 131910_0260.jpg
    196 KB · Views: 99
  • He162 line drawing.jpg
    85.2 KB · Views: 104
Thanks Guys for comps, small update engine cowlings and wheel bay doors pre-shaded and then sprayed RLM71, RLM76. Next up will be the pre-shaning of the fuselage and wings.
 

Attachments

  • 132310_0272.jpg
    87.1 KB · Views: 109
  • 132310_0275.jpg
    125.6 KB · Views: 110
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

D
1:72 Revell PT-13
Replies
7
Views
779
Lucky13
1/32 Vought F4U-1A Corsair Bubbletop.
6 7 8
Replies
146
Views
6K
Gnomey
Me-110 Revell/Dragon-1/32
2 3
Replies
42
Views
3K
Gnomey
Revell/Special Hobby Hawker Tempest 1/32- Finished
2 3
Replies
56
Views
4K
Gnomey
Revell 1/48 A-26B Invader– Maggie’s Drawers
2 3
Replies
40
Views
2K
Gnomey
Menu
Log in
Register