Trumpeter 1:32 Messerschmitt Bf 109F-4 Trop

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Gerry

Staff Sergeant
979
197
Jan 4, 2009
Dublin, Ireland
This is my finished build on the large scale Trumpeter Trop. The kit in the box is actually a G-2 with a lot of modifications needed to convert it to a F-4, particularly the angled wheel wells in the kit, the incorrect canopy and various vents and hatches on the fuselage that needed removal/repositioning. I also did a fair bit of enhancement in the engine bay including scratch-building oil tanks and extra wiring and plumbing.

The aircraft I choose to depict is Bf 109F-4 Trop, 6.JG3, W/No 10019, Gambut Libya Nov 1942, piloted by Lt. Josef Fritz. The scheme and decals were included in the kit. I understand that there is some discussion as to whether this scheme is accurate but looking at the available evidence I believe it is. I used lead wire for the aerials and they seem to have sagged a little (under their own weight?) since i installed them. I'll have a look at replacing them with fishing line, later.

Please forgive the makeshift background.

Gerry

Bf%20109F-4%20Trop%203_zpsxnvzk2xa.jpg


109F%20Trop%20front_zps6znl5uqm.jpg


Bf%20109F-4%20Trop%205_zpsesdx3olu.jpg


Bf%20109F-4%20Trop%204_zpsuxcz21g4.jpg


Bf%20109F-4%20Trop%201_zpsdnghph7q.jpg


109F%20Trop%20port%20rear%2034_zpskv17pike.jpg


109F%20Trop%20rear_zpsihbf3jyy.jpg


109F%20Trop%20rear%2034%20SB_zpsq7ecue2l.jpg


109F%20Trop%20SB%202_zpsj4msdmfh.jpg


109F%20Trop%20SB%20front%2034_zpsgmnz9oac.jpg
 
Forgot to add - I agree about replacing the lead antenna wire. It looks a touch thick, and with time it could well take on a 'corroded' look, and will sag with contraction and expansion with temperature changes. Even in this larger scale, 'invisible' mending thread is ideal - with a coat or two of paint, it'll bring it more to scale.
 
Thanks to everyone who looked in so far and for your positive response. I will change the aerial wire when I get home Terry. The first probable outing for this will be in May and for that I'll also need to produce a base/stand for it. And Terry, I've sent a PM.

Gerry :oops:
 

Users who are viewing this thread

Back