1/32nd scale Mosquito FBVI conversion.

[Airframes]

That sounds like a good idea! Maybe not 'Boddies' though, but perhaps Storm PGA .......

 

[Airframes]

I finally managed to get some sort of representation of the fuel management and electrical panels made and fitted, along with the forward half-bulkhead to blank-off the 'old' bomb-aimer's position. The latter took a lot longer than anticipated, as the cockpit fittings had to be dry-assembled, and test-fitted constantly to check alignment for where the bulkhead needed to go.
The pics show the bulkhead, the panels and switches, and some of the wiring and conduits in place. These will be cleaned up before spraying the cockpit walls Cockpit Green, then painting and detailing the various panels, wires etc.
Thanks again for your continued interest, and I'll try to post some more pics later this week.

 

[Wurger]

 

[Tony Hill]

Great detail Terry. Cetaily brings the cockpit "alive"

 

[Airframes]

Thanks Wojtek and Darryl.

 

[Crimea_River]

Krikey Terry! That looks great and will be the dog's danglies when painted.

 

[Vic Balshaw]

Have to agree.

 

[A4K]

Fantastic work Terry!
May be undertaking the same project with my 1:72 Tamiya B.IV at some stage!

 

[Airframes]

Thanks Andy, Vic and Evan. I hope to start on the throttles and other 'bits' on the port wall today sometime.

 

[al49]

8)8)8)

 

[rochie]

looks good my friend, will much of this great work be visible ?

 

[Airframes]

Thanks Alberto and Karl.
Yes mate, most, if not all will be very visible through the clear canopy, which is 3 x 1.5 inches (75x40 mm) in size.

 

[T Bolt]

Beautiful work Terry

 

[Airframes]

Thanks Glenn. In the process of making the throttle quadrant and other bits at the moment, might have some pics in a couple of days.

 

[Catch22]

Great stuff Terry!

 

[rochie]

Thanks Alberto and Karl.
Yes mate, most, if not all will be very visible through the clear canopy, which is 3 x 1.5 inches (75x40 mm) in size.

good stuff !

 

[Matt308]

Keep it comin'! Nicely done.

 

[Gnomey]

Looks great Terry!

 

[woljags]

love your work as always Terry,nice job so far mate

 

[woody]

Looking good.