1/48 Airfix Gloster Javelin FAW 9/9R

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

F-104nut

Staff Sergeant
898
1,024
Dec 14, 2011
Wichita,Kansas USA
Time for another big RAF Fighter on the bench . I got some Xttra decals and quick boost air scoops coming . Starting with the cockpit tonight . Scratch build the throttles and added some extra detail . Few other cockpit parts t clean up then time to start spraying some color .
09059C3B-3582-444A-A429-C3B54E04B58B by b007scott, on Flickr
55E759FF-93AC-4B0D-BF5E-E251813CB7CB by b007scott, on Flickr
18BA096A-A906-4633-B295-DEBF180B006C by b007scott, on Flickr
A165C070-EF6A-4945-8894-726C91F4BB2F by b007scott, on Flickr
776BC365-F763-4335-A2D2-D941FF0B316E by b007scott, on Flickr
D3BAD117-C44C-48DF-A264-AF0D7A88B2FA by b007scott, on Flickr

Brian
 
Spent the last few days working on the cockpit . I sprayed three various shades of black to give it that weathered look . Used model master and tamiya paints for the detailing , I weathered the area where the feet rubbed off paint with dry brushing model master silverSpent the last few days working on the cockpit . I sprayed three various shades of black to give it that weathered look . Used model master and tamiya paints for the detailing , I weathered the area where the feet rubbed off paint with dry brushing model master silver . Once I finish the forward section ill start o the act section . Got the super nice Xtradecals , quickbosst air scoops and brass pitot tubes in the mail . . Once I finish the forward section ill start o the act section . Got the super nice Xtradecals , quickbosst air scoops and brass pitot tubes in the mail .



C5A573CB-3793-454A-86A0-73841A799A6A by b007scott, on Flickr



479305B6-5928-4FD5-8AA6-FEEF8576E8AE by b007scott, on Flickr



22E66085-76E5-4038-9411-CCD1A84CDE62 by b007scott, on Flickr



13594B45-0271-4572-8A0E-FCF1F366D099 by b007scott, on Flickr



65E944B0-680E-4126-8D7F-FF0AA15EC730 by b007scott, on Flickr



A017E458-09E8-42C9-AD4E-7789B96C4D82 by b007scott, on Flickr



FAAF58A3-973C-42CC-BD5A-937C904E7B39 by b007scott, on Flickr



FAE495E0-E1A6-40B6-A92B-97419C1B4AD7 by b007scott, on Flickr



50CB8969-1443-49DD-BEFD-DBF067D21B19 by b007scott, on Flickr



2BDD226E-418B-4AD6-89D9-6F971F8FDAFF by b007scott, on Flickr



B44CAEDF-406A-4B61-9A53-FBC857C6C4C0 by b007scott, on Flickr



F0BA552D-2103-4C27-98EE-6A5AFFF02225 by b007scott, on Flickr



E0519515-635D-43EF-93DF-37F2C9AA1BC8 by b007scott, on Flickr



205ABBF7-F99D-498D-8CFA-9EFD1CC7BDCA by b007scott, on Flickr


Brian
 
Followed Antii K's idea on Britmodeler on how he did the burner cans . I went used a razor saw to cut the kick parts in half .I need to clean the burner cans up next . After i installed the burner can tubes on the lower airframe i had to sand the very end of them so the burner cans would fit flush . Once burner cans and FOD covers are attached I'll slide them on last . Forgot to mention the assembley of the burner cans it not the greatest fit ! By doing what I did the fit it much better .

81C21A6C-EB98-439B-8B96-9FCEAFE742CD by b007scott, on Flickr

BBEC7F0A-777A-4440-8FAE-86DD30F72DE5 by b007scott, on Flickr

610C9115-BC09-4BFC-B52C-CB86B0E2B000 by b007scott, on Flickr

41EF7BF3-5143-4938-A321-2976D95A312C by b007scott, on Flickr

1B151B01-EFA8-4DF3-A824-907481432953 by b007scott, on Flickr

Brian
 
Last edited:
Before installing the wheel wells i sprayed withem with Tamiya LP-11 areas need to be covered that the airbrush cant reach after installed . They will get sprayed again on the model when the bottom get sprayed with metal coat . When it came time to glue the intake lip on there was a small gap between the intke lip and fuseloge . I filled it with brsuhing mr color surfacer 1500 primder on then sanding oce dry . Wing installation was noit bad left wing went on great had some issues with the right wing which was easy to fix . Amazed at the size of the surface this plane was massive . Still plenty more ahead stay tuned .

7E68AE16-5316-4A00-95C1-A0CDE8480AE6 by b007scott, on Flickr

AA641481-A530-4263-B04A-4D7448BAEB86 by b007scott, on Flickr

449FCF39-BE54-4CF3-9C71-2810E3D0EDFD by b007scott, on Flickr

728D4F62-719F-4320-90F0-6031EB33861E by b007scott, on Flickr

01C2CAFF-3EC8-48A0-AD72-187A6862AB63 by b007scott, on Flickr

B58E384F-F104-4880-AC28-AA53B53D848F by b007scott, on Flickr

0E2CB90F-9A79-4886-81E8-02FCED244036 by b007scott, on Flickr

9A39DBB0-B7FA-4E8F-8884-D8F46548E67B by b007scott, on Flickr

3F03E25C-D7DA-4291-8AFF-093A41FBD869 by b007scott, on Flickr

DAA24EA1-5E9A-44D7-BCE5-472C41AC2ADC by b007scott, on Flickr

Brian
 
Last edited:
Well after cleaning up the HPModel Javelin seat and building a mount for it to fit on the square on the cockpit tub I've come to a conclusion the seats are way too small . The seats was barely above the cockpit not looking right and also looking way to small . So after lots of dry fitting i decided to cut the cushion separate from the frame , sanded the sides of the frame off and with some mods to the backside the cushion it fits in the kit seat frame.


3C154221-9177-4E88-AE5B-B880288DB864 by b007scott, on Flickr


6C102B31-27B0-46B3-86EF-C74E61CD9508 by b007scott, on Flickr





DC02F2D3-DEE6-4163-ABCB-019C914ECF87 by b007scott, on Flickr





BD25E53E-08D1-479E-B5DF-C63F7BA824DB by b007scott, on Flickr


Well after cleaning up the HPModel Javelin seat and building a mount for it to fit on the square on the cockpit tub I've come to a conclusion the seats are way too small . The seats was barely above the cockpit not looking right and also looking way to small . S


92E882BD-4006-4F0B-A29A-7D110E32844D by b007scott, on Flickr





7AD5BE7D-E48D-4571-931E-6B076595EC54 by b007scott, on Flickr





1051A0A9-0DD7-4AB9-A6EE-33A3E2B99A9E by b007scott, on Flickr





Got the ailerons , underbelly tanks on . Now starting to glue the Quickboost air scoops on .





6435812A-E03E-4172-BCDB-AC6DB1C0B66B by b007scott, on Flickr





381230B5-D252-4278-8F8F-B5E5700E2DF1 by b007scott, on Flickr





816C1567-FFF4-4DB4-92B4-6DC9FC424CA3 by b007scott, on Flickr





Small issue with the Javelin the trailing edge of the lower center tail wing section is a little short shot. Fixed it with some thin pieces of plastic . It was very easy sanding , bleanding and fixing .





0D65345F-E775-499B-A8AE-EC1AF75DCE36 by b007scott, on Flickr





FDF77AB7-6AE9-478B-A49B-80149F98BEF1 by b007scott, on Flickr





FA3BA743-5099-45DE-BDF4-A3506A1133A8 by b007scott, on Flickr










019E4C5F-CC90-4E33-92E5-757B83F06BDA by b007scott, on Flickr
 
Last edited:
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

1/48 Airfix Sea Fury - R.Francis
Replies
1
Views
13
Vic Balshaw
1/48 Airfix Hawker Hurricane Mk.I
2 3 4
Replies
66
Views
3K
Gnomey
Airfix 1/48 P-51-D "Stinky"
2 3 4
Replies
60
Views
3K
Grant Barr
V
1/48 Airfix Spitfire Mk XII
3 4 5
Replies
84
Views
4K
Lucky13
1/48 Airfix Buccaneer #2
2
Replies
23
Views
2K
Crimea_River
Menu
Log in
Register