Thank you all for the interest shown and your kind comments.
After 3 days of dedicating some hours to masking, I must say that, just because it is the yellow color in the lower part,... I paid a lot of attention to avoid splashing that part with the dark colors, so it was very meticulous to work on the engine nacelles and the greenhouse.
The same for the wavy lines of the sides. In the starboard I am going to venture into making that wavy line in two parts. The first is already for the application of the RLM71, the intention will be to make the coincidences in the sections that will take the RLM70
The rest was just masked consciously so as not to leave a small gap. For those details, I used the Micro Mask liquid mask
All the contour of the RLM71 camu, is exceeded between 1 and 3 mm, so that with the application of the RLM70, the dimensions are well defined and the two colors are best applied.
For some straight lines I used a 3M blue tape (normal maskin tape), in the sense that it will be with the RLM70 that uses the Tamiya tapes and check very well that there is no possibility of passing the paint throu below.
The RLM71 was applied without major setbacks. I´ll have to re-mask some windows with MM
Pritt tak, did his work with the wavy ...
This is an approach, where you can see the distance that exceeded the first color and the guide where the second one will be limited:
Another pair more from other angles
... and so she spend the night ...
I think until Saturday morning I will start masking to apply the RLM70, to give the greatest amount of time to the cure painting.
Meanwhile, at the very best, I start working on some loose pieces still yet to attend and / or begin to investigate the project for my second participation in these GB ... now the # 41
Saludos a todos y me dá gusto ver que estamos muy concentrados en nuestros proyectos =D>