1/48 ICM B-26B-13 Invader 416th BG

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

F-104nut

Staff Sergeant
897
1,021
Dec 14, 2011
Wichita,Kansas USA
Went to our Trailcon 2020 model show and picked up the new ICM Invader and couldnt wait to get home and start on it. The plastic and detail is very nice. One plus is the aviaonics behind the pilot that you dont get in the mail. The engine detail is super detail. I will be order some Kits World decals for this. Kit comes with htree options and decals look really great on the sheet .

121959476_775908876595244_4055513342192580133_n by b007scott, on Flickr

122012739_775885496597582_390891451327958345_n by b007scott, on Flickr

122039894_775909046595227_1094430995471492413_n by b007scott, on Flickr

121992735_775908986595233_1320440281528863118_n by b007scott, on Flickr

122004041_775908989928566_3758674364426640987_n by b007scott, on Flickr

122017437_775908863261912_9184966739077956058_n by b007scott, on Flickr

122022063_775908873261911_6807800307443986389_n by b007scott, on Flickr

122048664_775908856595246_9035006877811768337_n by b007scott, on Flickr

122119173_775908956595236_5352570175454006425_n by b007scott, on Flickr

122144548_775908946595237_3865930203166143142_n by b007scott, on Flickr

Brian
 
One thing to me that seems annoying with model companies is the lack of throttles. So i grabed sme spares from German aircraft and scratch builded the rest. It really adds more detail to the interior

122095830_776632986522833_9121370065525141930_n by b007scott, on Flickr

122043739_776632999856165_3141283266196466725_n by b007scott, on Flickr

122012739_776633016522830_6492480753057997923_n by b007scott, on Flickr

121814528_776633006522831_6857193467377002320_n by b007scott, on Flickr

Brian
 
Made a small amount of progress on the ICM Invader tonight . After final assemble of the nose section I went to test fit the nose to airframe and there was a step. The bottom nose to airframe fit is not bad . Where the bad step is the area up past the round pieces of the nose to to the top of the airframe. I tried pushing the airframe down and it made the step worse . I attempted to squeeze the nose and the sides to see if that would help and no luck. I cut the round jack stand mounts off vert to see if they interfered and no luck . Only choice was to add shim all the way around . So I glued for thin stripes of plastic and trimmed it back once dry . Step gone and for allot better. I am just Irritated to pay $85 for this and have that issue. But it's fixed and now I can move on with the project

122057244_778332706352861_3700131387641892507_n by b007scott, on Flickr

Brian
 
Tonight i assembled both left and right engine pods. The pit was not bad. Plue side the kit provided after and forward bulk heads. Wheel detail is not bad. My only other issue is not a fan of the gear attached to the inner wheel well deatail. So once model is mainly assembled i will have to rest the plane on a foam pad. Next up is the clean up and assemble of the wings and wheels .

122092651_776683963184402_3880516272720058122_n by b007scott, on Flickr

121829929_776684023184396_6711408599323502050_n by b007scott, on Flickr

122468902_779147716271360_8099001553543949592_n by b007scott, on Flickr

122442849_779147759604689_2377471938066701992_n by b007scott, on Flickr

122410211_779147772938021_2253901099412574305_n by b007scott, on Flickr

122374824_779147706271361_1959169726003285843_n by b007scott, on Flickr

Brian
 
Got my Aerocraft ICM Invader brass landing gear in the mail today. It will requir a little built of clean up but well worth the $25 total . Won't have to worry about the kit gear collapsing under the weight .

122446684_779881559531309_9171876727956751960_n by b007scott, on Flickr

122515705_779881572864641_8047121654586553454_n by b007scott, on Flickr

122597722_779881612864637_6889805509235658416_n by b007scott, on Flickr

Brian
 
Finally got some paint in the interior of the Invader . Appears the Korean War Invader Interior was black . So I first first brushed Tamiya interior green . Then I sprayed Tamiya flat black . Once dry I sprayed my own interior cockpit black . Theirs color sprayed was NATO black . For final fading I mixed NATO black with some neutral grey . Next will be flat coat and weather with some drybrushing before final detail is done

122439106_780653246120807_1489267897904842092_n (1) by b007scott, on Flickr

Brian
 

Attachments

  • 50522110792_8c42b966da_b.jpg
    137.3 KB · Views: 100
A little more spraying of black on the interior . I masked of the instrument panel , side of pilot airframe boxes , radio boxes and throttle area and sprayed it with AK Real color black . Next to flat coat parts and start some dry brushing

122812840_781371622715636_7919251594387561682_n by b007scott, on Flickr

122692002_781369756049156_7668428283684268718_n by b007scott, on Flickr

122508291_781369829382482_2140310250765341910_n by b007scott, on Flickr

122412530_781369779382487_2734788563484296634_n by b007scott, on Flickr

Brian
 
You must log in or register to reply here.

Users who are viewing this thread

Total: 1 (members: 0, guests: 1)

Similar threads

Revell 1/48 A-26B Invader– Maggie’s Drawers
2 3
Replies
40
Views
2K
Gnomey
D
1:72 Revell PT-13
Replies
7
Views
773
Lucky13
V
1/48 Monogram Bf109G-10
2
Replies
25
Views
836
fubar57
1/48 EA-18G Growler
Replies
14
Views
1K
Donivanp
Dazzled 1/48 NA-91 / P-51A? kit
4 5 6
Replies
112
Views
3K
Wurger
Menu
Log in
Register