Thanks chaps.
Bl**dy dangerous, these lamp bulbs !
When they 'blow' at the end of their life, they really go 'Pop !', blowing off the glass globe. Need to find some needle-nose pliers, in order to grip the remains of the bulb fitting to remove it.
Anyway, it's nearly done :-
PIC 1. The entrance door has been detailed, painted and fitted, along with the trailing aerial fairlead tube, left over from the Tamiya FB.VI kit, which has yet to be painted. The Eduard PE carb intake ice guards have been painted and fitted. These need to be retouched, and the 'mesh' area darkened slightly.
The small 'spot' below and to left of the nose window is one of the static vents, painted a brass colour.
PIC 2. The antenna mast has been fitted. This will be painted properly once the antenna wire has been attached, using 'invisible' thread, which will be done sometime tomorrow, after allowing the mast to fully set in place.
Once that's done, the props will be fitted, along with a ladder sourced from the Tamiya kit, a little re-touching done here and there and, eventually, the model will be placed on a suitable display base.