I've just checked Andy. The suggested kit is Hobbycraft; however, in my experience, due to the flexibility of these parts, they can be fitted to virually any kit, given that the fuselage edges are not excessively too wide or too narrow across the opening. The canopy is supplied in two parts, upper and lower, with a suggestion to cut away part of the kit fuselage section.
Can't see any harm in giving it a test fit at least (before doing any cutting) - if they won't fit comfortably, then nothing lost. It's no trouble sending the parts, as I have to go to the Post Office anyway, and the cost is only pennies.
BTW, I've e-mailed the cockpit drawings to you.