Thanks all.
I've now finished off detail painting of cockpit bits and added the seat belts. With that done, Ihave progressed to gluing th efusleage halves together. First, here's a view of the pilot's office. The seat belts are Eduard early RAF type and, if you look closely, I added a couple of lead wires to the control column, one of which runs up to the firing button that's painted silver.
The WO/Gunner's position also has belts added. The ends of these extend down to the floor.
The Observer just gets a rudimentary lap belt hung from his back rest. These are made of tape stuck to a couple of Eduard PE buckles to represent the attachment points.
I'm going to need to press down the pilot's belts a bit as they are kinda floating.
With that, the halves are glued together and, as warned, the fit is quite tight, especially at the bottom seam and the pilot's head rest. These areas are clamped and will remain so over night. The vice isn't doing anything other than holding the model off the surface so the lower clamp hangs free.
Thanks again for looking in guys.