**** DONE: GB-49 1/48 P-38M Lightning - WW2 Night Fighter

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Well good news and bad news. Got all of the final assembly done but the bad news is the gloss black on the main plane still is not dry. We had cold rain all weekend but it's still tacky to the touch and I got some fingerprints on it already. So will wait until next week, if it is dry should be easy to finish up installing all of these parts.
 

Attachments

  • 20210602_200926.jpg
    20210602_200926.jpg
    543.1 KB · Views: 53
Here are the clear parts, masked and painted interior green, when dry gave it a coat of the gloss black. You can also see the radar pod, painted the same gloss black as the rest of the plane but it dried nicely on this part.
 

Attachments

  • 20210602_201042.jpg
    20210602_201042.jpg
    399.9 KB · Views: 53
Here are the landing gears, I drilled the axles and added .032 brass rod since I don't want these breaking off holding the heavy booms. I added brake lines from black beading wire. The nose gear has an additional light that was installed on the -M. I made a bracket from sheet styrene and glued an old MV lens made for model railroads but work great for 1/48 lights. I made the pod around the lens from white glue and painted it black when dry.
 

Attachments

  • 20210602_200949.jpg
    20210602_200949.jpg
    355.2 KB · Views: 48
  • 20210602_201000.jpg
    20210602_201000.jpg
    384.5 KB · Views: 50
  • 20210602_200955.jpg
    20210602_200955.jpg
    368 KB · Views: 42
Last but not least, I had an extra set of Quickboost resin superchargers that look much better than the original Monogram parts. I painted them stainless steel then sprayed areas with Metalizer burnt iron. A black wash made it look more realistic.
 

Attachments

  • 20210602_201229.jpg
    20210602_201229.jpg
    392.2 KB · Views: 47
Last edited:
Getting ready for final assembly, I needed to get an extra week but will be done by Sunday. Added landing gear, gear doors, fuel tanks, rocket racks and radar pod tonight. About all that is left is the canopies, which are already painted.
 

Attachments

  • 20210617_212714.jpg
    20210617_212714.jpg
    1.3 MB · Views: 54
  • 20210617_212722.jpg
    20210617_212722.jpg
    1.3 MB · Views: 66
Mission accomplished, P-38 M is complete. Will still need to weather it and add lights, but for now I am calling it complete to finish by the extended time line. Now I just have to figure out where to post the completed photos.
Thanks
Dave Calhoun
 

Attachments

  • 20210619_154058.jpg
    20210619_154058.jpg
    1.5 MB · Views: 61
I tried to post a finished thread but it dosen't appear to have uploaded. Is the group build already closed?
Thanks
Dave
 

Users who are viewing this thread

Back