Username: PlasticHero First Name: Alan Category: Intermediate Scale: 1/72 Model: Mustang P-51D Manufacturer: Airfix A01004 Extras: Squadron Wheels TDP72209
This is the new Hornby mold and for the price, this kit is nearly as good as the Tamiya. The kit decals are for the Tuskegee 100 FS 332 FG flown by Spurgeon Ellington. I'm having to start slowly because of my shoulder but feeling highly motivated.
In spite of my shoulder, I have started and by that I mean there's a lot of sitting on the couch with my laptop looking at Mustang photos. Making notes about colors and I learned 2 things this week. One is that they had plywood floors and the other is the canopy has a support across its width.
I went with worn black, probably a non-slip surface for the floor. I found color pictures of museum Mustangs and they look green and black. Any thoughts? My instinct says black to reduce glare but the interior green is hardly shiny either.
I did not have a clear idea of the radiator assembly until I started looking at the kit parts and trying to figure out the colors. I have two versions of the intake side; IG or metal. I'm going with green like the upper photo.
On the exit side, I'm sure the top and sides are metal. If I can mask it well, I might try IG close to the radiator and part of the lower flap; not sure yet. There are also two small struts to add and something to represent the oil cooler.
What is the bulge in the upper left corner? I haven't seen that before. Here is a VERY lengthy document from a flight sim that reads like the pilot's manual.
Actually the last shot above is of the post-war CAC CA-18 RAAF Mustang Mk 21 A68-105 delivered to the RAAF in November 1947. The bulge seems to be a cover of an antenna for a post-war device. It was added in late 90' when she was restored to airworthy. Earlier pictures of her don't show the box there. IMHO there wasn't a such cover mounted at any of the WW2 P-51Ds.
I am looking at the kit drop tanks which I am using to test my Natural Metal skills and I see that they are left and right handed. I see only "left" handed ones in kits and photos.