****DONE Heavy Hitters GB Revell 1/48 Ju-87D

[B-17engineer]

Ok. ALso you need a clip to in order to keep it vertically when paint is drying
As the first paint use the RLM02 and paint the stick around the ending with the hole.It has to be a strip of 1mm width.Don't use too much of the paint.

Typo or did I got wrong Sorry!

 

[Wurger]

Harry 1mm of painted strip is OK.. Now you don't need the rest of the stick.So make it shorter leaving 10mm in total length. Did you understand?

 

[B-17engineer]

Ahhh!! I see.

Thanks!

 

[Wurger]

It could be shorter but 10mm sounds good at the moment.

 

[B-17engineer]

OK. It's 9mm.... Had to sand a bit.

 

[Wurger]

Very good.

Now, do you have any small box you can keep such small parts?

 

[B-17engineer]

I have a bag where I keep all clear/extra parts.

 

[Wurger]

A box is better.
Now you have to cut off the glass covering from the mould frame.Do it gentlly as these glass parts like to be broken. Cut off the part with short pieses of the frame and then put it on the self healing matt or block ( chunk) of wood ( it is much better).Then with the scalpel remove these remains of the frame.

 

[B-17engineer]

I don't quite grasp.

 

[Wurger]

Wait....

 

[B-17engineer]

 

[Wurger]

...

 

[B-17engineer]

Ohhh thanks! Appreciate !

Check out the thread about the books that got me kicked out of class.

 

[Wurger]

Ok, going there.

 

[B-17engineer]

OK.

 

[Wurger]

Is that the part?

If yes it looks good. Now try to check if it fit to the hole in the wing.

 

[B-17engineer]

Not exactly... Dinner!

 

[Wurger]

OK. Bon appetit !!!

 

[B-17engineer]

Back

 

[Wurger]

OK. Let's continue. Try to put it into the hole up side down.