****DONE Heavy Hitters GB Revell 1/48 Ju-87D

[B-17engineer]

Thanks! Forgot to do it when I did the rest so had to get a lot more off the brush.

 

[Crimea_River]

That looks pretty good Harrison. Nice job.

 

[B-17engineer]

Thanks Andy!

What did rudder pedals look like in a Ju-87?

 

[Airframes]

Good work so far H, keep it up. I think there's a pic of the pedals in Dan's thread. They were generally bare, dull metal, or painted grey, but with lots of dull metal showing through.

 

[B-17engineer]

Thanks Terry! I'll go have a look!

 

[B-17engineer]

Props. Nose was MASKED off not painted yellow. I made sure every area was masked to ensure no paint getting onto the nose. Now its drying..

 

[Wurger]

Looking good. But you don't need to mask a spinner if you use a brush.The better thing is to put the prop on a stick.You can rotate this around what makes very easy painting. If the spinner should be yellow for instance you have to paint it firstly.Then these prop baldes with the dark colour.

 

[B-17engineer]

I see. Thanks for the tip!

 

[Wurger]

 

[B-17engineer]

Feeling s*it tonigh so, I painted 2 halves of the wheels, finished the cockpit and drybrushed panel...

 

[Wurger]

Looking good.

 

[B-17engineer]

Thanks ! What color light blue are they referring to? Is it an RLM color?

 

[Wurger]

It depends on where the colour was applied.

 

[Crimea_River]

The dry brushing looks good Harrison. The rest too!

 

[109ROAMING]

With CR , the dry brushing is looking good!

 

[Airframes]

Nice work so far H.

 

[B-17engineer]

Thanks guys!

 

[B-17engineer]

It depends on where the colour was applied.

In my very last picture of the air intake (?) there is a non-painted area that is told to be a light blue.

 

[B-17engineer]

Dry fitted cockpit

I can see some obvious overflows which I will sand down. Can I go ahead and add instrument panel and seal it up?

 

[Wurger]

Looking nice.