marek
Senior Airman
Great!
Fw190A6 Sturmjager of Sturmstaffel1
- Thread starter Wurger
- Start date
Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules
Airframes
Benevolens Magister
Beautiful job Wojtek.
damn fine work!
109ROAMING
2nd Lieutenant
Dam fine work Wojtek! Most impressed
Lucky13
Forum Mascot
Catch22
Major
Nice!
A4K
Brigadier General
Great work my friend!
ccheese
Member In Perpetuity
Looking good.....
Charles
Charles
- Thread starter
- #449
Thank you mates. I appreciate....
Today it is raining almost all day long and it is a cloudy day.I don't like the kind of the weather when I'm working on models.It's too dark.Anyway I sanded a little bit the fuselage and fitted the cockpit conopy.As you notice the cockpit conopy is too short now because of making the fuselage longer.But the main problem is that the lower edge of it is of an incorrect angle to the fuselage and there a piece of polistyrene has to be added at the end of it.That's way the white piece of plastic there in pics.Comparing the conopy to drawings I've gotten an idea of adding something like a wedge to the bottom edges of the conopy what will let me to get the correct angle and the conopy correct lenght.
I appreciate....Today it is raining almost all day long and it is a cloudy day.I don't like the kind of the weather when I'm working on models.It's too dark.Anyway I sanded a little bit the fuselage and fitted the cockpit conopy.As you notice the cockpit conopy is too short now because of making the fuselage longer.But the main problem is that the lower edge of it is of an incorrect angle to the fuselage and there a piece of polistyrene has to be added at the end of it.That's way the white piece of plastic there in pics.Comparing the conopy to drawings I've gotten an idea of adding something like a wedge to the bottom edges of the conopy what will let me to get the correct angle and the conopy correct lenght.
Attachments
Lucky13
Forum Mascot
Absolutely beautiful Wojtek! 
ccheese
Member In Perpetuity
Looking good, Wojtek. I am patiently waiting to see you put some paint on
this !!
Charles
this !!
Charles
- Thread starter
- #452
Lucky13
Forum Mascot
Like clean the sparkplugs, swap the valves, check the counterbalance etc. on the engine, right my friend? 
- Thread starter
- #454
Airframes
Benevolens Magister
Then the oleo pressures need setting, and a retraction test completed, before engine tests and taxying trials. There's more work and dedication gone into this than a new Flug Werke 190!!
Marvellous!
Marvellous!
Njaco
The Pop-Tart Whisperer
Wurger could you scratch-build a frame at the front of the canopy to lengthen it? Or not possible?
marek
Senior Airman
Great! Yes! And now we are waiting for rescabing!?
- Thread starter
- #458
Of course it is possible but the difference in the conopy lenght is about 2mm.So 2mm x 72 = 144mm = 14.4cm. Well..I don't think the frame was of the width. That's way it will be easier to add some of plastic like you can see in the pic below.
THX Marek.
Attachments
8)
ccheese
Member In Perpetuity
Amazing..... simply amazing !
Charles
Charles