Airframes
Benevolens Magister
It's like the words of the song - "Straighten up and fly right..."!!
Great work once more Wojtek!
Great work once more Wojtek!
Fw190A6 Sturmjager of Sturmstaffel1
- Thread starter Wurger
- Start date
bravo Wojtec
- Thread starter
- #303
Thanks Terry and Karl.I appreciate.
Here shots of my works on the upper halves.Like the lower one both were too wide about 1mm.I decided to cut off the one milimetre from the middle of each half ( between these black lines) and put then together again. Using the razor-saw I slit both of them and then sanding I got rid of the 1mm of plastic.Because I like sanding
I removed a little more polistyrene than I needed and as a result I had to add a thin plastic strip.But it helped me to fit both parts of each half correctly.
Here shots of my works on the upper halves.Like the lower one both were too wide about 1mm.I decided to cut off the one milimetre from the middle of each half ( between these black lines) and put then together again. Using the razor-saw I slit both of them and then sanding I got rid of the 1mm of plastic.Because I like sanding
I removed a little more polistyrene than I needed and as a result I had to add a thin plastic strip.But it helped me to fit both parts of each half correctly.Attachments
Lucky13
Forum Mascot
I'm lost for words Wojtek! This is truly masterclass! 
- Thread starter
- #305
Airframes
Benevolens Magister
Absolutely brilliant! I think, by now, I would have given up and got a Spitfire!!
marek
Senior Airman
Wow!
Excellent Wojtek!!!
ccheese
Member In Perpetuity
Truly elegant work, Wojtek. I think everyone is impressed with your attention
to detail. Amazing...
Charles
to detail. Amazing...
Charles
- Thread starter
- #310
Maximowitz
Tech Sergeant
Blimey! That's attention to detail. Nice.
A4K
Brigadier General
With everyone else - beautiful work Wojtek!
- Thread starter
- #313
Lucky13
Forum Mascot
I think that it's time for me to retire from modeling...! Truly amazing work Wojtek!
- Thread starter
- #315
Thanks Jan but don't exaggerate please.Your models looks splendidly and you are going well I think.So go to the next kit and don't give up.Understand
!!!
Lucky13
Forum Mascot
Sir, Yes Sir! (and thanks!)
(and thanks!)- Thread starter
- #317
- Thread starter
- #318
Hi guys ,
Today I was stll working on the both wing upper and lower halves.The upper ones were sanded ( in the 1st pic) Then the wing tips were shaped correctly and the new width of ailerons was engraved.Here the rest of shots.
Now these are fitting to drawings much better, aren't they?
Today I was stll working on the both wing upper and lower halves.The upper ones were sanded ( in the 1st pic) Then the wing tips were shaped correctly and the new width of ailerons was engraved.Here the rest of shots.
Now these are fitting to drawings much better, aren't they?
Attachments
you make it look so easy Wojtec
Lucky13
Forum Mascot
Should be ashamed! What can I say Wojtek.....outstanding, amazing comes to mind.
What can I say Wojtek.....outstanding, amazing comes to mind. 
