this afternoon I'll put on the primer, I was going to give it a gunze gray but I think I'll give it a black Vallejo so that I can make the metal over it more nuanced, for later chipping.
Well, this is the fast until this afternoon / evening that will put more progress.
the primer is given, now that it is well dry to go over some grout that has surely come out of the airbrush and paint the metal.
we go with the metallic color I have to give it two layers so that it is well
first layer
second layer
paint the color sky at the bottom and mask it to give the color dark earth
now to make the chipping of the paint, to make them use worn effects of ak-interactive spray with airbrush on the surface of the plane let it dry half an hour
I dry the paint on it, let the paint dry. to do the deconchon later just before placing the masking
good friends here I return another shot of photos and destruction that I do.
As I read the product to make the chips in the paint.
finish of doing it to color the masks and I give the dark green, to proceed to remove the masks and that in the unions of the colors. primer layer, when removing the mask from a wing the first one I take out jumps almost 3/5 parts of the primer and paint of that wing.
so quickly to remove the paint and the primer of Vallejo to repaint everything again, so now you go back to the starting point, model in metal and masked to pull the dark earth to chipped and paint the dark green later to later shell it
time is running out but I hope it arrives on time, and again the earth is drying to make the peeling and the masks have already made to place them immediately dry after peeling, so this afternoon could do the green