GB-64 1/48 P-51D "Race 6" - One Trick Pony

Ad: This forum contains affiliate links to products on Amazon and eBay. More information in Terms and rules

Plugging!
So this a.m. I am at the bench, for a little bit, still sluggish.
I taped all around the PVC insert, about 1.5mm gap to file the edges down to Kit level.
This protects detail in the surrounding area. Thickness of the tap is hardly noticeable.
Filing will tatter the tap anyway and will be closer when finished.
I show the two files I use, because no 2 are alike. The blue covered flat is a Tamiya file
from the three file set. It is rather smooth, doesn't take much off. The red one is from
yet Another set and is a bit more aggressive and I use it a lot. Never hurts to have both.
Gonna go rest up a bit..........
 
 

Attachments

  • IMG_3660.jpeg
    1.4 MB · Views: 6
  • IMG_3661.jpeg
    1.8 MB · Views: 6
Last edited:

Users who are viewing this thread